Guido Casatiandrmagueta
a58cf178ed
This commit implements proper PDU Session Release handling across
RRC, PDCP, F1AP, E1AP to ensure clean resource cleanup when
a PDU session is terminated.
Key changes:
NGAP:
In `rrc_gNB_process_NGAP_PDUSESSION_RELEASE_COMMAND()`:
* Populates E1AP Bearer Modification for each released session
* If a CU-UP is connected, triggers `bearer_context_mod()` for PDU teardown
PDCP:
* Added `nr_pdcp_release_drbs()` to remove all DRBs linked to a given PDU session
* Called from `e1_bearer_context_modif()` for correct clean-up during session release
F1AP UE Context Modification:
Replace direct RRC message transfer with F1AP UE Context Modification Request
to properly handle PDU session release according to 3GPP TS 38.331.
3GPP TS 38.331 `5.3.5.6.4 DRB release` says: whether or not the RLC and MAC entities associated
with a PDCP entity are reset or released is determined by the CellGroupConfig. Thus,
updated CellGroupConfig needs to be received by the UE. This has to be retrieved by CUCP
from the DU. Therefore:
After receiving an NGAP_PDUSESSION_RELEASE_COMMAND, the CUCP shall:
1) forward (store for later) the NAS PDU to the UE, if present as per 3GPP TS 38.413, and
2) send a UE Context Modification to the DU with the list of DRBs to release
and the RRC container (RRCReconfiguration with NAS PDU)
After reception of UE Context Modification Response, the list of drbs to release
is prepared based on PDU session status PDU_SESSION_STATUS_TORELEASE
in rrc_gNB_generate_dedicatedRRCReconfiguration and then encoded
in drb_ToReleaseList for a new RRCReconfiguration with the new cellGroupConfig.
Key changes:
* rrc_gNB_generate_dedicatedRRCReconfiguration_release() now uses F1AP UE Context
Modification Request instead of direct RRC transfer
* Only DRBs to be released are now added to the list.
* The ASN.1 memory allocation is entirely done in build_RRCReconfiguration_IEs
* No longer needed to store ASN1 struct in UE context
GTP-U:
* Previous implementation had incomplete tunnel cleanup during PDU session release
- Missing distinction between N3 (PDU session level) and F1-U (DRB level) tunnels
- Lack of proper DRB identification for F1-U tunnel deletion
Major Changes:
* GTP tunnel teardown now handled in `e1_bearer_context_modif()` using the correct
F1 or N3 GTP instance (`newGtpuDeleteOneTunnel()`)
* Enhanced Tunnel Deletion Logic (cucp_cuup_handler.c):
- Separate handling for N3 tunnels (1 per PDU session) and F1-U tunnels (1 per DRB)
- Added proper DRB identification for F1-U tunnel cleanup
- Improved error handling with detailed logging for each tunnel deletion
- Enhanced logging to distinguish between N3 and F1-U tunnel operations
* New PDCP API Function (nr_pdcp_oai_api.c/h):
- Added nr_pdcp_get_drb_ids_for_pdusession() function
- Enables retrieval of all DRB IDs associated with a specific PDU session
- Supports proper F1-U tunnel cleanup by providing DRB identifiers in CUUP
* Enhanced GTP Interface (gtp_itf.cpp/h):
- Modified newGtpuDeleteOneTunnel() to accept tunnel_type parameter
- Improved logging to distinguish between PDU session and DRB tunnel types
- Better error messages for tunnel deletion failures
- Enhanced debugging information for remaining tunnels
Clean-up:
* Ensured xid tracking works consistently between PDU Session Establishment (with NAS PDU)
and dedicated RRCReconfiguration
* Add function to release GTP-U tunnel in Bearer Context Modification Request handler
* Do not send rrc_gNB_send_NGAP_PDUSESSION_RELEASE_RESPONSE when no PDU session are to
be released: it is sent upon completion of the RRCReconfiguration and needs to contain
released PDU Sessions (mandatory IE), therefore it is no necessary to send it in case
there is no PDU session to release.
Related to #867
Co-authored-by: rmagueta <rmagueta@allbesmart.pt>
OpenAirInterface License
It is distributed under OAI Public License V1.1.
The license information is distributed under LICENSE file in the same directory.
Please see NOTICE file for third party software that is included in the sources.
Where to Start
- General overview of documentation
- The implemented features
- System Requirements for Using OAI Stack
- How to build
- How to run the modems
Not all information is available in a central place, and information for specific sub-systems might be available in the corresponding sub-directories. To find all READMEs, this command might be handy:
find . -iname "readme*"
RAN repository structure
The OpenAirInterface (OAI) software is composed of the following parts:
openairinterface5g
├── charts
├── ci-scripts : Meta-scripts used by the OSA CI process. Contains also configuration files used day-to-day by CI.
├── CMakeLists.txt : Top-level CMakeLists.txt for building
├── cmake_targets : Build utilities to compile (simulation, emulation and real-time platforms), and generated build files.
├── common : Some common OAI utilities, some other tools can be found at openair2/UTILS.
├── doc : Documentation
├── docker : Dockerfiles to build for Ubuntu and RHEL
├── executables : Top-level executable source files (gNB, eNB, ...)
├── maketags : Script to generate emacs tags.
├── nfapi : (n)FAPI code for MAC-PHY interface
├── openair1 : Layer 1 (3GPP LTE Rel-10/12 PHY, NR Rel-15 PHY)
├── openair2 : Layer 2 (3GPP LTE Rel-10 MAC/RLC/PDCP/RRC/X2AP, LTE Rel-14 M2AP, NR Rel-15+ MAC/RLC/PDCP/SDAP/RRC/X2AP/F1AP/E1AP), E2AP
├── openair3 : Layer 3 (3GPP LTE Rel-10 S1AP/GTP, NR Rel-15 NGAP/GTP)
├── openshift : OpenShift helm charts for some deployment options of OAI
├── radio : Drivers for various radios such as USRP, AW2S, RFsim, 7.2 FHI, ...
├── targets : Some configuration files; only historical relevance, and might be deleted in the future
└── tools : Tools for use by the developers/ci machines: code analysis and formatting
How to get support from the OAI Community
You can ask your question on the mailing lists.
Your email should contain below information:
- A clear subject in your email.
- For all the queries there should be [Query] in the subject of the email and for problems there should be [Problem].
- In case of a problem, add a small description.
- Do not share any photos unless you want to share a diagram.
- OAI gNB/DU/CU/CU-CP/CU-UP configuration file in
.confformat only. - Logs of OAI gNB/DU/CU/CU-CP/CU-UP in
.logor.txtformat only. - In case your question is related to performance, include a small description of the machine (Operating System, Kernel version, CPU, RAM and networking card) and diagram of your testing environment.
- Known/open issues are present on GitLab, so keep checking.
Always remember a structured email will help us understand your issues quickly.