Guido Casati
c5787aa9a9
As per TS 38.401 §8.7: if the UE accesses a DU different from the original
one during re-establishment, the CU must trigger UE Context Setup toward
the new DU. This refers to steps 9-10 and steps 9'-10'. Either one or the
other can be executed during re-establishment.
e.g. if this happens during F1 handover, it shall trigger a
UE Context Setup fallback on the CU.
This commit implements the required behavior:
1. Detection mechanism:
- Add `old_du_assoc_id` field to `f1_ue_data_t` to store the original
DU association ID
- At RRCReestablishmentRequest: Store original `du_assoc_id` in
`old_du_assoc_id` and update `du_assoc_id` to the new DU
- At RRCReestablishmentComplete: Compare `old_du_assoc_id` with the
`assoc_id` from the Complete message to detect different DU
2. UE Context Setup trigger:
- In `rrc_gNB_process_RRCReestablishmentComplete()`: When different DU
is detected, call `rrc_f1_ue_context_setup_for_target_du()` to trigger
UE Context Setup procedure (per TS 38.401 §8.7, NOTE on steps 9-10)
upon reception of UL RRC MESSAGE TRANSFER
- In `rrc_CU_process_ue_modification_required()`: Refuse UE Context
Modification Required when `old_du_assoc_id != 0` to avoid conflicts
with the ongoing UE Context Setup procedure (per TS 38.401 §8.7, NOTE
on steps 9'-10')
3. UE Context Setup:
- Replace `clone_CellGroupConfig()` with `get_cellgroup_config()` in
UE Context Setup handler
- Call `update_cellgroup_for_reestablishment()` during UE Context Setup
when `reestablish_rlc` flag is set to prepare CellGroupConfig with
reestablishRLC flags
- Clean up `old_du_assoc_id` in `rrc_CU_process_ue_context_setup_response()`
- Add `free_ue_context_mod_req()` call after UE Context Modification request
4. Function signature updates:
- Update `handle_rrcReestablishmentComplete()` to accept `gNB_DU_ue_id`
and `assoc_id` parameters, change return type from `int` to `void`
- Update `rrc_gNB_process_RRCReestablishmentComplete()` to accept
`assoc_id` parameter
- Update `rrc_gNB_decode_dcch()` to accept and forward `assoc_id` parameter
Re-establishment on different DU flow (TS 38.401 §8.7, steps 9-10):
1. UE sends RRCReestablishmentRequest to new DU
2. DU forwards to CU via UL RRC MESSAGE TRANSFER
3. CU detects different DU (`assoc_id != ue_data.du_assoc_id`):
- Stores `old_du_assoc_id = ue_data.du_assoc_id` (original DU)
- Updates `ue_data.du_assoc_id = assoc_id` (new DU)
4. CU sends RRCReestablishment to UE
5. UE sends RRCReestablishmentComplete to new DU
6. DU forwards to CU via UL RRC MESSAGE TRANSFER
7. CU detects different DU scenario (with old_du_assoc_id):
- Triggers UE Context Setup Request to new DU via `rrc_f1_ue_context_setup_for_target_du()`
8. DU receives UE Context Setup Request:
- Detects re-establishment (`UE->reestablish_rlc` flag)
- Calls `update_cellgroup_for_reestablishment()` to set reestablishRLC flags
- Encodes CellGroupConfig with reestablishRLC flags and sends to CU
9. CU receives UE Context Setup Response:
- Stores encoded CellGroupConfig
- Clears `old_du_assoc_id = 0`
10. CU sends RRC Reconfiguration with transparent CellGroupConfig to UE
OpenAirInterface License
It is distributed under OAI Public License V1.1.
The license information is distributed under LICENSE file in the same directory.
Please see NOTICE file for third party software that is included in the sources.
Where to Start
- General overview of documentation
- The implemented features
- System Requirements for Using OAI Stack
- How to build
- How to run the modems
Not all information is available in a central place, and information for specific sub-systems might be available in the corresponding sub-directories. To find all READMEs, this command might be handy:
find . -iname "readme*"
RAN repository structure
The OpenAirInterface (OAI) software is composed of the following parts:
openairinterface5g
├── charts
├── ci-scripts : Meta-scripts used by the OSA CI process. Contains also configuration files used day-to-day by CI.
├── CMakeLists.txt : Top-level CMakeLists.txt for building
├── cmake_targets : Build utilities to compile (simulation, emulation and real-time platforms), and generated build files.
├── common : Some common OAI utilities, some other tools can be found at openair2/UTILS.
├── doc : Documentation
├── docker : Dockerfiles to build for Ubuntu and RHEL
├── executables : Top-level executable source files (gNB, eNB, ...)
├── maketags : Script to generate emacs tags.
├── nfapi : (n)FAPI code for MAC-PHY interface
├── openair1 : Layer 1 (3GPP LTE Rel-10/12 PHY, NR Rel-15 PHY)
├── openair2 : Layer 2 (3GPP LTE Rel-10 MAC/RLC/PDCP/RRC/X2AP, LTE Rel-14 M2AP, NR Rel-15+ MAC/RLC/PDCP/SDAP/RRC/X2AP/F1AP/E1AP), E2AP
├── openair3 : Layer 3 (3GPP LTE Rel-10 S1AP/GTP, NR Rel-15 NGAP/GTP)
├── openshift : OpenShift helm charts for some deployment options of OAI
├── radio : Drivers for various radios such as USRP, AW2S, RFsim, 7.2 FHI, ...
├── targets : Some configuration files; only historical relevance, and might be deleted in the future
└── tools : Tools for use by the developers/ci machines: code analysis and formatting
How to get support from the OAI Community
You can ask your question on the mailing lists.
Your email should contain below information:
- A clear subject in your email.
- For all the queries there should be [Query] in the subject of the email and for problems there should be [Problem].
- In case of a problem, add a small description.
- Do not share any photos unless you want to share a diagram.
- OAI gNB/DU/CU/CU-CP/CU-UP configuration file in
.confformat only. - Logs of OAI gNB/DU/CU/CU-CP/CU-UP in
.logor.txtformat only. - In case your question is related to performance, include a small description of the machine (Operating System, Kernel version, CPU, RAM and networking card) and diagram of your testing environment.
- Known/open issues are present on GitLab, so keep checking.
Always remember a structured email will help us understand your issues quickly.