Robert Schmidt
8107939f08
- all RAN code, CI code, configuration files, dockerfiles, in CSSL v1.0
- all deployment code (openshift, charts, ancillary files like shell
scripts), in MIT
- documentation in CC-BY-4.0
- exceptions might apply and are listed in NOTICE
- there is a new LICENSES folder with all licenses
- CONTRIBUTIONS.md has been updated accordingly
For automated changes based on OAI PL v1.1:
perl -i~ -0pe 's/\/\*.*Licensed to the OpenAirInterface.*openairinterface.org\n#?/\/*\n * SPDX-License-Identifier: LicenseRef-CSSL-1.0\n/s' **/*.{c,h,cpp}
perl -i~ -0pe 's/\/\*.*Licensed to the OpenAirInterface.*openairinterface.org\n#?/\/*\n * SPDX-License-Identifier: LicenseRef-CSSL-1.0\n/s' **/*.ts
perl -i~ -0pe 's/<!--.*Licensed to the OpenAirInterface.*openairinterface.org\n.*-->/<!-- SPDX-License-Identifier: LicenseRef-CSSL-1.0 -->/s' **/*.xml
The rest (cmake, files with missing license, cmake) manually.
81 lines
2.9 KiB
Markdown
81 lines
2.9 KiB
Markdown
<!-- SPDX-License-Identifier: CC-BY-4.0 -->
|
|
|
|
This is a simple tester for the CU-UP. It configures the CU-UP via E1, and can
|
|
stream data via GTP in uplink and downlink directions.
|
|
|
|
[[_TOC_]]
|
|
|
|
# Overview
|
|
|
|
From a schematic point of view, the tester/CU-UP interaction looks like this:
|
|
|
|
```
|
|
+-------+
|
|
+------>| CU-UP |<------+
|
|
| +-------+ |
|
|
| | |
|
|
| F1-U | E1 | NG-U
|
|
| (data) | (control) | (data)
|
|
| | |
|
|
| +-------+ |
|
|
+------>|tester |<------+
|
|
+-------+
|
|
```
|
|
|
|
The tester is for performance testing of a CU-UP, and behaves like an
|
|
integrated DU/CU-CP/UPF from the CU-UP's point of view.
|
|
|
|
The tester and CU-UP have an E1 connection through which control information is
|
|
exchanged, e.g., configuration of UEs/bearers and associated information. In
|
|
other words, towards the CU-UP, the tester appears like a CU-CP.
|
|
|
|
Further, for each UE/bearer, CU-UP is configured with GTP IP information and
|
|
the corresponding TEID. The CU-UP will forward downlink data arriving on NG-U
|
|
on the F1-U interface, and uplink data arriving on F1-U on the NG-U interface.
|
|
In other words, on the F1-U interface, the tester appears like a DU to the
|
|
CU-UP, and on the NG-U interface, the tester appears like a UPF to the CU-UP.
|
|
|
|
A test scenario is fixed to these steps:
|
|
|
|
1. The tester sets up a number of UEs via the E1 interface (it is possible to
|
|
see the message exchange in Wireshark).
|
|
2. The tester streams data in downlink/uplink (from the CU-UP's point of view)
|
|
and measures how much data is lost.
|
|
3. The tester releases all the UEs via the E1 interface, and disconnects from
|
|
the CU-UP.
|
|
|
|
Note: The tester uses the same GTP module as the CU-UP. Thus, data might not
|
|
only be lost at the GTP interface of the CU-UP, but also at the tester.
|
|
|
|
# Usage
|
|
|
|
You can build the CU-UP and the tester like so:
|
|
|
|
cd ~/openairinterface5g
|
|
mkdir build && cd build && cmake .. -GNinja && ninja nr-cuup nr-cuup-load-test params_libconfig
|
|
./tests/nr-cuup/nr-cuup-load-test
|
|
./nr-cuup -O ../tests/nr-cuup/load-test.conf
|
|
|
|
This builds both tester and CU-UP in the directory `build/`, then starts the
|
|
load tester with default values
|
|
|
|
- 1 UE
|
|
- 10s of Test
|
|
- 60 Mbps of traffic in both downlik/uplink with a packet size of 1400 bytes
|
|
|
|
To see the available options, run
|
|
|
|
./tests/nr-cuup/nr-cuup-load-test -h
|
|
|
|
The configuration file [`load-test.conf`](./load-test.conf) matches the default
|
|
tester configuration (F1-U GTP traffic over non-standard port 2153, NG-U GTP
|
|
over 2152, tests on localhost). The configuration file includes this
|
|
non-standard port 2153 as the GTP module, as of now, cannot bind on the same
|
|
interface and port for both F1-U and NG-U due to internal limitations.
|
|
|
|
# Limitations
|
|
|
|
- The tester does not yet create/remove UEs during a traffic test.
|
|
- It might be possible to integrate with an external GTP traffic generator,
|
|
but we did not test this.
|