Cedric Roux
56c66c09aa
Pre-ci test passed git-svn-id: http://svn.eurecom.fr/openair4G/trunk@4000 818b1a75-f10b-46b9-bf7c-635c3b92a50f
70 lines
2.3 KiB
Plaintext
70 lines
2.3 KiB
Plaintext
|
|
0. Introduction
|
|
This directory involves the simulation of GN and FAC to test these interfaces.
|
|
|
|
1. Dependencies
|
|
Python packages should be installed.
|
|
|
|
2. Building
|
|
There is no build for this tool, it's plain Python which is interpreted rather
|
|
than to be built, see section 3. Running.
|
|
|
|
3. Commands
|
|
Following commands are supported.
|
|
|
|
3.1. DEFINE Command Family
|
|
3.1.1. DEFINE SERVER_ADDRESS <address>
|
|
Defines the destination address (i.e. the MGMT-CORE's address)
|
|
|
|
3.1.2. DEFINE SERVER_PORT <port>
|
|
Defines the destination port (i.e. the MGMT-CORE's port)
|
|
|
|
3.1.3. DEFINE CLIENT_PORT <port>
|
|
Defines the client's port (i.e. source port that is used to send the packets to MGMT-CORE from)
|
|
|
|
3.1.4. DEFINE CLIENT_TYPE <clientType>
|
|
Defines client type and can be 'GN', 'FAC', or 'LTE'
|
|
Packets sent will have relevant event types and sub-types based on this client type
|
|
|
|
3.2. SEND Command Family
|
|
3.2.1. SEND COMMUNICATION_PROFILE_REQUEST
|
|
Sends a COMMUNICATION_PROFILE_REQUEST packet to MGMT-CORE's given port
|
|
|
|
NOTICE: Client type has to be defined in advance for this command since event sub-type
|
|
changes from client to client for this packet
|
|
|
|
3.2.2. SEND NETWORK_STATE
|
|
Sends a NETWORK_STATE packet to MGMT-CORE's given port
|
|
|
|
3.2.3. SEND WIRELESS_STATE
|
|
Sends a WIRELESS_STATE_RESPONSE packet to MGMT-CORE's given port
|
|
|
|
NOTICE: Client type has to be defined in advance for this command since event sub-type
|
|
changes from client to client for this packet
|
|
|
|
3.2.4. SEND LOCATION_UPDATE
|
|
Sends a LOCATION_UPDATE to MGMT-CORE's given port
|
|
|
|
3.2.5. SEND CONFIGURATION_NOTIFICATION
|
|
Sends a CONFIGURATION_NOTIFICATION to MGMT-CORE's given port
|
|
|
|
3.2.6. SEND GET_CONFIGURATION
|
|
Sends a GET_CONFIGURATION to MGMT-CORE's given port
|
|
|
|
NOTICE: Client type has to be defined in advance for this command since event sub-type
|
|
changes from client to client for this packet
|
|
|
|
3.3. Util Command Family
|
|
3.2.1. WAIT Command
|
|
Makes the simulator wait for the specified amount of seconds
|
|
|
|
4. Running
|
|
Since this simulator has been written in Python you need to have the Python interpreter.
|
|
In order to run first scenario file, for example, issue the following command,
|
|
|
|
$ python main.py scenarios/01.sce
|
|
|
|
5. References
|
|
|
|
- Baris Demiray <baris.demiray@eurecom.fr>
|