Files
openairinterface5g/openair3/UTILS/mme_default_values.h
T
2015-10-06 16:53:42 +00:00

140 lines
6.6 KiB
C

/*
* Copyright (c) 2015, EURECOM (www.eurecom.fr)
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* The views and conclusions contained in the software and documentation are those
* of the authors and should not be interpreted as representing official policies,
* either expressed or implied, of the FreeBSD Project.
*/
#ifndef MME_DEFAULT_VALUES_H_
#define MME_DEFAULT_VALUES_H_
/*******************************************************************************
* Timer Constants
******************************************************************************/
#define MME_STATISTIC_TIMER_S (60)
/*******************************************************************************
* GTPV1 User Plane Constants
******************************************************************************/
#define GTPV1_U_PORT_NUMBER (2152)
/*******************************************************************************
* S1AP Constants
******************************************************************************/
#define S1AP_PORT_NUMBER (36412) ///< S1AP SCTP IANA ASSIGNED Port Number
#define S1AP_SCTP_PPID (18) ///< S1AP SCTP Payload Protocol Identifier (PPID)
#define S1AP_OUTCOME_TIMER_DEFAULT (5) ///< S1AP Outcome drop timer (s)
/*******************************************************************************
* S6A Constants
******************************************************************************/
#define S6A_CONF_FILE "../S6A/freediameter/s6a.conf"
/*******************************************************************************
* SCTP Constants
******************************************************************************/
#define SCTP_RECV_BUFFER_SIZE (1 << 16)
#define SCTP_OUT_STREAMS (32)
#define SCTP_IN_STREAMS (32)
#define SCTP_MAX_ATTEMPTS (5)
/*******************************************************************************
* MME global definitions
******************************************************************************/
#define MAX_NUMBER_OF_ENB (2)
#define MAX_NUMBER_OF_UE (64)
#define MMEC (0)
#define MMEGID (0)
#define PLMN_MCC (208)
#define PLMN_MNC (34)
#define PLMN_MNC_LEN (2)
#define PLMN_TAC (0)
#define RELATIVE_CAPACITY (15)
/*******************************************************************************
* IPv4 Constants
******************************************************************************/
/* Default network card to use for IPV4 packets forwarding.
* up stands for user-plane.
* cp stands for control-plane
*
* +-----------+ +------+ +-----------+
* | eNB +------+ | ovs | VLAN 1+------+ MME |
* | |cpenb0+------------------+cpmme0| |
* | +------+ |bridge| +------+ |
* | |upenb0+-------+ | | |
* +-----------+------+ | | | +-+------+--+
* +---|--+ |s11mme|
* | +---+--+
* | VLAN3 | (optional)
* | +---+--+
* | |s11sgw|
* | +-+------+--+
* | | S+P-GW |
* | VLAN2 +------+ +--------+
* +----------+upsgw0| |pgwsgi0 +
* +------+ +--------+
* | |
* +-----------+
*/
#define DEFAULT_SGW_INTERFACE_NAME_FOR_S11 ("s11sgw")
#define DEFAULT_SGW_IP_ADDRESS_FOR_S11 ("192.168.10.1")
#define DEFAULT_SGW_IP_NETMASK_FOR_S11 24
#define DEFAULT_SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP ("upsgw0")
#define DEFAULT_SGW_IP_ADDRESS_FOR_S1U_S12_S4_UP ("192.168.1.1")
#define DEFAULT_SGW_IP_NETMASK_FOR_S1U_S12_S4_UP 24
#define DEFAULT_SGW_INTERFACE_NAME_FOR_S5_S8_UP ("upsgw1")
#define DEFAULT_SGW_IP_ADDRESS_FOR_S5_S8_UP ("192.168.5.2")
#define DEFAULT_SGW_IP_NETMASK_FOR_S5_S8_UP 24
#define DEFAULT_PGW_INTERFACE_NAME_FOR_S5_S8 ("uppgw0")
#define DEFAULT_PGW_IP_ADDRESS_FOR_S5_S8 ("192.168.5.1")
#define DEFAULT_PGW_IP_NETMASK_FOR_S5_S8 24
#define DEFAULT_PGW_INTERFACE_NAME_FOR_SGI ("eth0")
#define DEFAULT_PGW_IP_ADDR_FOR_SGI ("192.168.14.17")
#define DEFAULT_PGW_IP_NETMASK_FOR_SGI 24
#define DEFAULT_MME_INTERFACE_NAME_FOR_S11 ("s11mme") ///< MME control plane interface
#define DEFAULT_MME_IP_ADDRESS_FOR_S11 ("192.168.10.2") ///< MME control plane IP address
#define DEFAULT_MME_IP_NETMASK_FOR_S11 24;
#define DEFAULT_MME_INTERFACE_NAME_FOR_S1_MME ("cpmme0") ///< MME control plane interface
#define DEFAULT_MME_IP_ADDRESS_FOR_S1_MME ("192.168.11.1") ///< MME control plane IP address
#define DEFAULT_MME_IP_NETMASK_FOR_S1_MME 24;
#endif /* MME_DEFAULT_VALUES_H_ */