Hide normal table initialization of Ziggurat generator from outside to
force the usage of randominit() for RNG initialization. In this step,
remove the randominit() seed parameter and only rely on OAI_RNGSEED for
a consistent RNG initialization, as this parameter was used differently
("0" as fixed number or to force a random seed).
Now, only use OAI_RNGSEED env variable to force the usage of a fixed
seed.
Note: after this commit, monolithic works but nFAPI operation is broken
and fixed in the next commit, to keep the changes small(er). All
simulators work.
This commit removes the use of msgDataTx's intermediate buffers for FAPI
messages and the call of the "Schedule response". The latter incurs an
additional copy of FAPI messages for the TX chain (for the RX chain, it
is and will remain there) which we can avoid.
Instead, it uses an NR_Sched_Rsp_t-typed variable sched_response to
store the results of the scheduler when called from tx_func(). Thus, the
scheduler remains unchanged (it gets a pointer to where to put FAPI
messages), but we don't call nr_schedule_response() to then copy FAPI
messages into the L1, but have them in a local variable sched_response.
sched_response on on the data segment, as it is big and would overflow
the stack; at the same time, this is ok because only one tx_func() runs
at a time.
Since we don't use allocate_sched_response() anymore, we don't need
deref_sched_response().
clear_slot_beamid() is moved to tx_func(), as it was called in
nr_schedule_response().
Since the "intermediate" NR_gNB_DLSCH_t structure groups both the
DL_tti_pdsch and TX_data.req structures, a pointer has been created to
point to pdsch_pdu. This affects a number of simulators, as they have to
put some messages on the stack:
- nr_dlschsim: put the corresponding variable on the stack
- nr_pbchsim: a new array for the SSB PDUs has been introduced
Further, these changes are now necessary:
- nr_dlsim: there were variables "rel15" and "pdsch_pdu_rel15" that
point to the same PDSCH PDU. At least "rel15" would not exist, as the
corresponding pointer is now populated in phy_procedures_gNB_TX(), and
we therefore refer to the single PDSCH PDU variable with
"pdsch_pdu_rel15", but at the place where "rel15" used to be
initialized.
- nr_ulsim: use nr_save_ul_tti_req() to load PDUs into the RX chain
instead of nr_schedule_response(), which does not exist anymore.
The next commit will remove msgDataTx. We can therefore not use
msgDataTx to retain the PDSCH/DLSCH variables, and move them to the gNB.
Note that the only reason for NR_gNB_DLSCH_t after this commit is to
hold various large buffers (c, b, f). Future work could be done to
remove this, in which case the array inside PHY_VARS_gNB could be
deleted.
On this occasion, clean up the use of init_DLSCH_struct() and
reset_DLSCH_struct() (renamed destroy_DLSCH_struct()) and centralize
their call in phy_init_nr_gNB()/phy_free_nr_gNB(), and correct
simulators accordingly.
DLSCH encoding is not concerned with HARQ processes directly. Instead,
it gets the redundancy version and encodes a specific redundancy version
for a given TB. The rest is up to the MAC, the L1 is stateless in that
regard. Hence, remove the HARQ type and put it into DLSCH, which also
simplifies the code elsewhere.
1. nrLDPC_coding_segment_encoder: pointer not aligned on 64 bits
An undefined behavior was happening because of a shift on a __m64 which
was actually a uint32_t which was not aligned on 64 bits.
This commit suggests a fix by properly loading into a __m64 with _mm_set_pi32
before performing the shift.
2. nr_rate_matching: Filler bits detection
Previously, if the bit selection was reaching Ncb and restarting selection from the beginning of encoded data, the filler bits were detected by testing the bytes again NR_NULL which was equal to 2.
But on this branch the bits of up to 8 segments are stored in one byte while doing rate matching so that one byte could be tested to be a filler while it is not.
So this commit changes the way to test filler bits.
Instead of relying on NR_NULL, bit selection now relies on the offset and size of filler bits.
3. nr_ulsch_coding: missing filling f with zeros
The array `f` of the UE UL HARQ process was not filled with zeros between transmissions.
This is a problem if the encoder does not properly overwrite its output.
In order to avoid such situation, this commit adds a memset to fill `f` with zeros before passing it to the encoder.
4. nrLDPC_coding_segment_encoder: missing init of f to zeros
In the encoder, `f` is not filled with zeros before being used.
`f` is instead somehow filled with arbitrary values.
When writing to `output` by 64 bit vectors, some arbitrary bits may be added after the segment.
Then the arbitrary added ones are not overwritten when writing the next segment because of writing with a logical or.
This commit properly fills `f` and `f2` with zeros.
5. nr_ulschsim & nr_dlschsim: Adapt modulation to new encoder output
The QPSK symbols that are feed to the channel model of nr_dlschsim were determined based on the bytes of the encoder output.
With the new output of the encoder, it had to be reworked to determine the QPSK symbols based on the bits of the encoder output.
1. 3GPP Rate-matching/interleaving on 8-segment blocks, deinterleaving at output of multi-segment processing.
2. Bit-packing done in nrLDPC_coding_segment_encoder.c now instead of nr_scrambling.
Interestingly, it improves performance significantly too.
Tested for AVX512 only for now.
When using T2 virtual functions, it is important to properly stop DPDK and free the device.
Otherwise the virtual functions may be blocked and a restart of the admin application is necessary.
Up to now, SIGINT was shutting down the PHY simulators without freeing the device.
This commit adds a signal handler to handle SIGINT in a way that allow to properly free the device.
This feature is first added to the PHY simulators that use the T2 which are `nr_ulsim`, `nr_dlsim`, `nr_ulschsim` and `nr_dlschsim`.
The idea is to make LDPC iteration accounting more standard from a C coding perspective by making two changes:
1. Now the iteration counter starts at 0 for the first iteration and goes up to max_ldpc_iterations - 1 for the last iteration.
If it is equal to max_ldpc_iterations, it means that decoding failed.
2. A chain of useless returns in the UE DLSCH decoding call chain was removed.
Changes to support multiple TDD patterns
- Updated the configuration changes for 2 Patterns
- Update the TDD table configuration for NFAPI
- Added the tdd bitmap for the period
- Adapted the bitmap for UL/DL for the multi TDD pattern
- Updated the RACH procedure for multi TDD pattern
- Updated DL and UL scheduler for multi TDD pattern
* assuming num_dl_slots and num_ul_slots are including also
slots with dl/ul symbols respectively
* refactor set_tdd_config_nr
* moved function to MAC
* fill max_num_of_symbol_per_slot_list depending on slot type
* use new set_tdd_config_nr in stack
* minor refactor in config.c to improve readability (scs)
Co-authored-by: Guido Casati <guido.casati@firecell.io>
Repair nFAPI in 5G
Add 5G nFAPI in OAI/Make it it work.
Many commits in this branch are basically bug fixes of things that don't work
properly, such as
- check for correct conditions (e.g. instance numbers in the RAN context)
- remove artificial limitation (e.g. only one PUCCH per TDD period in the PNF)
- improve performance (reduce big mallocs, make some static buffers such as a
global ring buffer for nFAPI messages in the PNF)
- fix bugs in nFAPI (e.g., increase maximum message size to ~64kB instead of
1500 bytes, because the latter is way too small for many TX_data.requests in
5G, and it will delay message arrival unduly)
- fix bugs in message enc/dec (e.g., handle FDD in config.request)
- adjust the L1 such that the condition "we run monolithic" is not necessery
(e.g., some message numbers in nFAPI struct where reset in MAC, instead of
L1, and this breaks when running the PNF)
There are instructions that explain how to set it up. Two CI tests have been
added, one with COTS UE and MIMO in DL+UL in TDD numerology 1 (30kHz), and a
second test with FDD mu=0 (15kHZ) in RFsimulator.
These were some old to-dos that have been addressed.
- test with COTS UE - 4x4 pipeline works good in DL, UL now also work
- test in RFsim
- make PNF status message
- make FDD in u0 work
The L1 receives a pointer to the L1 payload to use for PDSCH generation.
This would overwrite an existing pre-allocated pointer. Remove this
preallocation. Instead, allocate it in the simulator (the only place
that actively uses this buffer allocation; in nr-softmodem, it's lost by
assigning a pointer). Allocate with an extra byte, because the payload
(in bits) might not be a multiple of 8 bits/1 byte, so the CRC is in the
last 3 bytes.
Also, improve the log with frame/slot information if the PDSCH payload
pointer is NULL.
FAPI says these lists should be for MAX_TDD_PERIODICITY (which is maybe
a frame, or a TDD period? but likely not two frames). Reduce to one
frame.
Also, the nFAPI code assumes one entire frame, so use that (this commit
necessary to actually make the PNF work, otherwise, the
packing/unpacking of the FAPI message would need to do 2 frames).
Closes: #876
LDPC coding was yet not properly stopped by using free_nrLDPC_coding_interface in gNB and UE.
This was not causing major issue until now. It was especially not causing any issue with T2 LDPC coding using the PF.
But using T2 VFs, if the coding library is not properly stopped then the VF cannot be used anymore unless the admin app is restarted.
So this MR adds the missing free_nrLDPC_coding_interface.
- removed some whitespace noise.
- cleaned up CMakeLists.txt
- reintegrated task_manager.c into thread-pool.c
- cleaned up some unnecessary code
Co-authored-by: Cedric Roux <cedric.roux@eurecom.fr>
Co-authored-by: Mikel Irazabal <mikel.irazabal@openairinterface.com>
See getopt(3): returns int, so store it in an int variable.
I went through all occurrences, project-wide. All return values of
getopt() should be stored in ints now.
This commit fixes a bug caused by global variables in the gNB_MAC_INST
structure used to transfer MAC scheduler's results to the PHY layer.
When using several threads in the PHY layer, it may happen that the
MAC scheduler is called a second time by the second PHY thread for the
next slot before the content of the global variables in the gNB_MAC_INST
structure used to store the result of the MAC scheduler for the current
slot have been consumed by the first thread, leading to unpredictable
results (all of them certainly wrong).
The solution is to introduce a small memory management module for the
interface between the PHY threads and the MAC scheduler. The MAC
scheduler now fills the data structures passed to it, and not a
global variable anymore. The PHY layer manages the structures and
ensures that no data is overwritten before being fully consumed by
the various threads of the PHY layer.
Some care has to be taken because several PHY threads will access the
same structures at the same time for a given slot (in read mode, so
it's okay). A mechanism of reference counting has thus been introduced.
Only one CC is supported. This restriction should not be too hard
to remove if/when needed. (The code before this commit does not seem
to work for more than one CC anyway.)
DL config as array in MAC
Run RX slot processing in Tpool thread
Fixed race in phy config
Changed mac_IF_mutex
Proc Tx: Lets wait for Proc Rx to get ACK/NACK
-(only on slots that carry ACK/NACK)
Fix problem with rfsim
Separated PDCCH and PDSCH decoding functions. Run PDCCH decoding in main UE_thread.
Fixed race in MAC dci config struct
needed for parallel processing of slots
Moved DLSCH transport block buffer to stack
rx_ind as static allocation
L2sim: Fixed calling of MAC sched in wrong slot
Fix DCI extract bug for RA procedure
The simulators have been changed: due to linker errors that would arise
otherwise, a lot of functions are defined in them to avoid such errors.
Some functions are also defined in header files; in this commit, we
define most functoins in nr_dummy_functions.c, which is compiled in, not
by including the C file, but by adding it to the target in
CMakeLists.txt
- nr_dlsim+nr_ulsim need NR_IF_Module_init(), so it cannot be in
nr_dummy_functions, but the others need it
- Link correcr NR_IF_Module_init() into these simulators, and reduce
overall link list
- Correctly link remaining simulators
Laurent THOMAS