ue txData more contextual, but still global as it is entangled with usrp driver
- txData buffer is global and entangled even in usrp oai driver because of tx
thread feature
- it also makes weird combination with continuous tx usrp bug workaround
- this MR makes most of the calls contextual but keep the globakl txData
- later a MR should remove the global and tackle it with proper context, but we
need to modify gNb, UE, 4G and probably all oai drivers
Fix DMRS for PUCCH format 2
This MR fixes the DMRS for PUCCH format 2.
While at the OAI-UE we have:
uint16_t startingPRB = pucch_pdu->prb_start + pucch_pdu->bwp_start;
uint idxGold = startingPRB >> 2;
uint32_t *seq = gold_cache(temp_x2, idxGold + pucch_pdu->prb_size);
At gNB side, it was missing pucch_pdu->bwp_start, i.e., it was:
uint32_t *sGold = gold_cache(x2, pucch_pdu->prb_start / 4 + ngroup / 2);
uint8_t *sGold8 = (uint8_t *)(sGold + pucch_pdu->prb_start / 4);
This MR was tested with COTS UE with a bwp_start other than 0, and now PUCCH format 2 is being decoded correctly.
Move this message down, at the end of the function, if no code path
exists under which msg3 allocation might fail despite this log having
been printed.
Assume the minimum grant (min_rb) size to be the bandwidth part size. As
an example: rbStart 0, min_rb=bwpSize=106. This should pass, hence
modify these two conditions.
Co-authored-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Integration: `2025.w18`
Closes#953
See merge request oai/openairinterface5g!3413
* !3385 Add enc/dec lib for E1 Bearer Context Setup Failure
* !3410 Avoid segmentation fault when testing trigger reestablishment and there is no DRB[0] established
* !3411 Remove assert for SRI-PUSCH-PowerControl
* !3291 Improvements in handling UE context in gNB DU
* !3416 Signal gNB-DU config update CellStatus from DU to CU
* patch to fix memory leak on DRB_ToAddModList
* update phytest-timing thresholds
Signal gNB-DU config update CellStatus from DU to CU
Add the cell status to gNB-DU configuration update message, including
test. Use the gNB-DU configuration update to signal the cell status in
the stack.
This IE was not included in a previous refactoring round, but is at
least necessary to be decoded when interoperating with the OSC O-DU.
Improvements in handling UE context in gNB DU
The goal of this MR is to improve the handling of UE context in gNB DU.
To achieve this goal, the UE structure is created as soon as the gNB
receive a PRACH indication. At that stage the UE is placed in a new
structure containing UEs performing RA, untill RA is complete where it
is moved to the list of connected UEs. To simplify the code and to
improve the handling of initial procedures (see #751), DCI 10 and DCI 00
is used at every stage until the DU receives from CU the indication of
UE RRC reconfiguration being completed.
Remove assert for SRI-PUSCH-PowerControl
SRI-PUSCH-PowerControl is not implemented at this point but its enough
to warn about incorrect power control behavior rather than assert on the
configuration.
Closes#953
This is preparatory work to allow NSA-like modes to be used over F1 in
the future. Notably, it fills the F1 message for UE context setup with
GTP TEID, and fills additional information to "make the F1 encoder
happy" (fill in QFI etc). Also, provide some F1 fixes to make this work.
Remove stale UE connections, if relevant.
sdap_tun_read_thread needs to know if we are gNB/UE. Previously, we
passed this into the thread, but the next commit also needs to for
interface termination, where this info is not available. So, for noS1
mode, pass this in.
Add functionality to trigger the addition of a new RRC UE context (in
the CU) for NSA modes, using F1. This commit makes do-ra and phy-test
modes work. "True" NSA will work in the next commit, which also sends
the X2 addition request answer message.
Use the gNB-DU configuration update to signal the cell status in the
stack. At the DU, modify the code to always send this message --
previously, we only sent this message if a SIB1 update was necessary,
but now it's always, only including SIB1 updates if necessary.
At the CU, as we don't really have a use as of now, print the
information, but don't do anything with it.
Add enc/dec lib for E1 Bearer Context Setup Failure
This MR is adding:
- the enc/dec library
- unit test
- handler and callback in stack
For the E1 Bearer Context Setup Failure.
- rewrite add_UE_to_list() and rewrite remove_UE_from_list() to simplify
list handling
- return pointer from get_new_nr_ue_inst(); it's completely freed by
delete_nr_ue_data()
- have add_new_UE_RA() add UE context to access list; remove with
nr_release_ra_UE()
- have add_connected_nr_ue() only add UE to connected list; to move from
access to connected use transition_ra_connected_nr_ue(); remove with
mac_remove_nr_ue() as previously
- free memory on problems during RA
- add some documentation
- in NSA/HO: check for pre-configured RA process
- there are asserts in all functions to clarify when a UE has RA
Jaroslava Fiedlerova