1. Allocate memory for the ue_id and ue_info_list arrays on the stack.
Explanation:
Every granularity period, the program passes through the fp_match_cond_type,
then through match_s_nssai_test_cond_type function pointers. Based on the node type,
the function used calloc() for these arrays.
=> the longer a connection with an E2SM-KPM xApp was, the more memory leakage occured.
2. If matched UEs > 0, only free the memory of ue_id content after each
Indication Message was sent.
Integration `2026.w12`
* !3985 Fix XNAP to avoid recompilation and unnecessary includes
* !3724 Better c style pss sss
* !3972 Resolve "Demote AssertFatal `PUCCH list is full` message to a warning"
* !3956 [FHI72] [xran F] Revert and simplify the code for Liteon FR2 interoperability
* !3970 Fix for NTN phy-test mode
* !3987 T: minor: remove target record_db from automatic building
* !3993 UE: Derive Serving Network Name from SIB1 PLMN
* !3997 vrtsim doc: clarify container requirements
* !3935 [FHI72] Fix long PRACH format
* !3998 Set rxgain to 0 in vrtsim
* !3964 CI: Add FHI7.2 phytest pipeline
* !4001 Remove unused ci-scripts/mysql4testresults/ dir and content
* !3999 bugfix: use proper pointer
* !3986 handle start symbol on non-zeroth downlink symbol for SIB1 for multiplexing pattern 3 configuration.
* !3957 replace static allocation of max antennas in a dynamic structure for gnb rach
* !3859 Delay compensation in SRS
* !3909 Adjust ssPBCH_BlockPower in FHI7.2 configs
Closes#1058
See merge request oai/openairinterface5g!3989
Adjust ssPBCH_BlockPower in FHI7.2 configs
ssPBCH_BlockPower is the average EPRE of the resources elements that carry
secondary synchronization signals in dBm. In OAI, the SSB is the same level
as all the rest, so we can compute ssPBCH_BlockPower from RU TX power and
bandwidth using:
ssPBCH_BlockPower = P_TX(dBm) − 10 x log10(N_RB x 12)
where:
- P_TX is the RU transmit power
- 24 dBm for indoor RUs (configurable on the RU)
- 35 dBm for outdoor RUs (configurable on the RU)
- N_RB is the number of resource blocks for the configured bandwidth
- 12 corresponds to the number of subcarriers per RB
replace static allocation of max antennas in a dynamic structure for gnb rach
NB_ANTENNAS_RX was used in 5G by mistake
there was also a error in O-RU implementation, with no consequences
(index not in right order)
handle start symbol on non-zeroth downlink symbol for SIB1 for multiplexing
pattern 3 configuration.
This MR adds support for handling a non-zero start symbol for SIB1 when using
multiplexing pattern 3 with the per-slot CP format.
Previously, the implementation assumed that the first downlink symbol used by
a PDU always starts at symbol 0. However, this assumption does not hold for
SIB1 under multiplexing pattern 3, where the start symbol can be non-zero.
This issue does not apply to the per-symbol CP format.
Testing:
a. Microamp using the branch microamp_1048: UE registration ok. end-to-end ok.
b. Benetel: UE registration ok. end-to-end ok.
CI: Add FHI7.2 phytest pipeline
This MR consists of multiple changes related to FHI7.2 setups in CI.
- remove unused fhi72 configurations in CI
- introduce dpdk-init service in fhi72 deployments to setup sriov on the machine
- update phytest fhi72 configurations for running on bulbul
- add phytest fhi72 to RAN-SA-FHI72-CN5G pipeline
Set rxgain to 0 in vrtsim
Set rxgain to 0 in vrtsim to match rfsimulator behavior
This addresses the issue where RSRP is different between rfsim and vrtsim. With
this RSRP values between rfsim and vrtsim should be similar.
[FHI72] Fix long PRACH format
The problem was that xran_is_prach_slot() compared if the current slot is the
scheduled one. However, this becomes irrelevant if long PRACH format used.
Successfully tested end-to-end the PRACH index 7 with TDD DDDDDDDSUU and Benetel
v2.0.5.
- Introduce dpdk-init service for SR-IOV initialization within the container
- Execute script to enable low-latency RT performance (restored after tests)
When running phytest with FHI7.2 in Docker, two services are deployed:
dpdk-init and oai-gnb. Previously, AnalyzeRTStatsObject selected the
first deployed service for RT stats analysis.
Allow to explicitly select the service used for RT stats analysis instead
of relying on the first deployed service.
vrtsim doc: clarify container requirements
Describe how to set up vrtsim in containers, e.g., docker, and link to an
example. Add a minor clarification for the connection descriptor as well.
UE: Derive Serving Network Name from SIB1 PLMN
This MR modifies the nrUE to use the Serving Network Name derived from data
communicated by the Serving Network instead of data stored in the UICC.
Previously, the Serving Network Name (SNN) used during authentication was
constructed from the IMSI, implicitly assuming the UE was attached to its
home network. In roaming scenarios, this produced an incorrect SNN, causing
authentication and key derivation failures.
Changes:
- Extract the MCC and MNC from the SIB1 PLMN identity communicated by the
serving network.
- Store these values in the UE NAS context in order to propogate them from
RCC to NAS.
- The NAS key derivation functions (transferRES, derive_kausf, derive_kseaf)
now build the SNN based on the MCC/MNC broadcast in SIB1.
Extract MCC and MNC from the SIB1 PLMN identity and store them in the
UE NAS context to propogate them to NAS security procedures.
Previously, the Serving Network Name (SNN) used during authentication
was constructed from the IMSI, implicitly assuming the UE was attached
to its home network. In roaming scenarios, this produced an incorrect
SNN, causing authentication and key derivation failures.
The NAS key derivation functions (transferRES, derive_kausf, derive_kseaf)
now build the SNN using the MCC/MNC broadcast by the serving network in SIB1,
ensuring that authentication uses the correct serving PLMN during roaming.
T: minor: remove target record_db from automatic building
We don't install clickhouse by default, so simply running make inside
common/utils/T/ would fail. Remove record_db to not build automatically.
Fix for NTN phy-test mode
- Corrected the initialisation of ntn params changed flag. Before this change on
UE, Phy-test was not running in NTN mode.
- Removed the assert wrt slot > 64 to run FR2-NTN in phy-test
- SIB2, 19 required only in SA mode like SIB1
- Introduced new method to schedule a slot in UL/DL in Phy-test mode. Dmod/ Umod
option in the command line with a value.
- This ensures that the slot n (in slots per frame) will be scheduled if
n % value == 0
- For ex: --Dmod 1 means every slot will be scheduled
- --Dmod 2 means every 2nd slot will be scheduled, like 0,2,4,6 until the
slots per frame 1.
- this can be used for testing FDD FR2 where slots go beyond 64 which is a
limitation of -D/-U option.
[FHI72] [xran F] Revert and simplify the code for Liteon FR2 interoperability
The MR !3668 introduced a lot of unnecessary changes. This MR removes useless
code in both OAI and xran F release library.
1. Remove modifications done in the following xran functions:
process_mbuf_batch();
xran_process_srs_sym().
=> not even used with OAI 7.2 interface.
2. Also, remove xran_fs_get_num_dl_sym_sp() and xran_fs_get_num_ul_sym_sp() introduced in the same MR.
3. Remove LiteOnIgnoreUPSectionIdEnable parameter. Instead, use RunSlotPrbMapBySymbolEnable in a simple way
for xran_process_rx_sym() function.
Explanation: The xran expects UL UP packets with the same section IDs as indicated per UL CP message.
However, the section IDs of received packets are 3 for mixed slot and 13 for UL slot.
If the PRACH offset is set explicitely via config file, then its value will be used.
Otherwise, eAxC_offset = max(Nrx,Ntx).
Co-authored-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Better c style pss sss
there is a commit to simplify code for pss and sss detection
then a second commit to test a idea: detect SSS with a advantage for SSS
in phase with PSS
Only static long PRACH configuration verified, i.e. PRACH C-plane
is ignored by the RU.
Note: Introducing `N_ZC` and `num_prbu` parameters is needed for testing
with xran F release. However, in the K release, this information is
stored in xran_rx_packet_ctl struct.
Move PRACH slot checking from oaioran.c to oran_isolate.c because
xran_is_prach_slot() compared the current slot instead of the scheduled.
The current and the scheduled slot are the same in case of short format,
but different in case of format 0. Therefore, with this commit, in xran_is_prach_slot()
we check the `prach_id->slot` and not `slot`.
the code use a precomputed table of rotations: 16 steaps between -PI/3 and +PI/3
This commit replaces the precomputed table by in code computation.
This version improves code understanding, while it won't make any significant difference
Teodora