The new format left-aligns the component name and enforces a minimum width
of 7 (log component) characters, padding shorter names with spaces after
the closing "]".
Example output:
[14:05:43.395376] [E1AP] I releasing UE 1
[14:05:43.395400] [GTPU] I [91] UE ID 1: Delete all tunnels (1 tunnels)
[14:05:43.395414] [NR_RRC] A [DL] (cellID bc614e, UE ID 1 RNTI 8e27) Send RRC Release
[14:05:43.395431] [RRC] I UE 1: received bearer release complete
[14:05:43.424551] [RLC] W Remove UE 36391
[14:05:43.424597] [NR_RRC] I removed UE CU UE ID 1/RNTI 8e27
[14:05:43.424773] [NR_RRC] A [--] (cellID bc614e, UE ID 1 RNTI 8e27) Remove UE context
[14:05:43.425205] [NR_MAC] I Remove NR rnti 0x8e27
[14:05:43.582158] [HW] W Lost socket
^C
** Caught SIGTERM, shutting down
Returned from ITTI signal handler
[14:05:43.948721] [GNB_APP] I stopping nr-softmodem
[14:05:43.948746] [PHY] I Killing gNB 0 processing threads
[14:05:44.574818] [PHY] I Stopping RU 0 processing threads
[14:05:44.575000] [PHY] I RU 0 RF device stopped
[14:05:44.575006] [GNB_APP] I turned off RU rfdevice
Prior to this change, when no "level" option is given to the logging
module, we see
[PHY] RU 0 RF started cpu_meas_enabled 0
[HW] No connected device, generating void samples...
with three spaces, which is too much. This change reduces the amount of
spaces to 1 without log level.
Co-authored-by: Robert Schmidt <robert.schmidt@openairinterface.org>
We probably almost never care about the date, but it takes a lot of
space. Remove it; if somebody needs the full time stamp including the
date, we could still add it with a new option.
Add monolithic N2 handover test pipeline with B210 and Quectel
The goal of this MR is to provide an automated end-to-end N2 HO
validation with real RF (B210) and Quectel UE.
During the testing phase a post-HO assertion failure due to
uninitialized selected_plmn_identity was found: this was also fixed.
CI: Add monolithic N2 handover test pipeline (B210 + Quectel)
- New XML pipeline for N2 HO testing
- Docker Compose for two monolithic gNBs (gNB1/gNB2)
- Handover sequence: gNB1 → gNB2 → gNB1 with 5s controlled attenuation
(RC4DAT).
- Channel mapping: ch1-2 gNB1, ch3-4 gNB2
- Telnet server enabled for CI commands
- Clean-up/reset of attenuator state included
NGAP
- fix PLMN/cell location for Initial UE and Uplink NAS
- Prevents assertion in ngap_gNB_nas_uplink() due to uninitialized
selected_plmn_identity
- Initial UE Message: pass UE-selected PLMN and NR cell ID from RRC to
NGAP
- Uplink NAS Transport: use PLMN, TAC, and cell ID from the message
- Build NR CGI as gNB ID + cell ID
- Store UE-selected PLMN only in RRC UE context (for later NAS); stop
storing PLMN in NGAP UE context.
- PLMN validation when processing handover requests from the source gNB:
when PLMN validation fails, the target gNB now properly sends
NGAP_HANDOVER_FAILURE
- Store serving PLMN for later use in UE context
OAI UE: add shared RSRP Table 10.1.6.1-1 mapping function to helpers and adopt
it RRC UE
- Add to common/utils/nr/nr_common remove from NR_MAC_UE/nr_ue_procedures.c
- Adopt in asn1_msg.c for MeasurementReport: this solves the following possible
assert:
Assertion (enc_rval.encoded > 0) failed!
In do_nrMeasurementReport_SA() /oai-ran/openair2/RRC/NR/MESSAGES/asn1_msg.c:898
ASN1 message encoding failed (MeasResultServMOList, 18446744073709551615)!
Motivation: unify RSRP-to-index mapping across layers and fix NR RRC
MeasurementReport encoding failures due to out-of-range values by reusing the
validated mapping.
Note: NR_RSRP-Range.c constraint: /* (0..127) */
Also refactored MeasurementReport to improve the code.
- Add to common/utils/nr/nr_common remove from NR_MAC_UE/nr_ue_procedures.c
- Adopt in asn1_msg.c for MeasurementReport: this solves the following assert:
Assertion (enc_rval.encoded > 0) failed!
In do_nrMeasurementReport_SA() /oai-ran/openair2/RRC/NR/MESSAGES/asn1_msg.c:898
ASN1 message encoding failed (MeasResultServMOList, 18446744073709551615)!
Motivation: unify RSRP-to-index mapping across layers and fix NR RRC MeasurementReport
encoding failures due to out-of-range values by reusing the validated mapping.
Note NR_RSRP-Range.c constraint:
{ APC_CONSTRAINED, 7, 7, 0, 127 } /* (0..127) */
Remove NR L2 simulator code from UE
This MR removes NR (SA and NSA) L2 simulator from the codebase. The code, at
least at the UE side, was done at a time where there was no clear L2/L1 split
leading to a complex implementation that never worked as expected. The L2
simulator has been broken and removed from testing for long time and, once it
needs to be revived, it would require a complete new implementation.
Optimization of PDSCH precoding operation
x86/aarch64 optimizations for precoding, more complete timing reporting in
nr_dlsim. Timing report in nr_dlsim now shows the total PDSCH generation time
and is broken down into Layer mapping, resource mapping and precoding.
The optimizations for x86 are basically reorganizing loops (for AVX512,AVX2,
NEON but not SSE2) to minimize repetitive instructions when formatting of the
precoder weights, and creation of inline functions for complex multiply-add.
AVX512 optimization was added. requiring AVX512BW. Detection of up to 4 PRBs
with common PMI for efficiency with AVX512 (was 2 in develop for AVX2).
For aarch64, native coding of the precoder to avoid inefficient SIMDe
translations for this operation.
nr_dlsim now uses default precoding indices depending on the scenario instead
of 0 which doesn't do precoding at all.
See merge request description for nr_dlsim test results.
SRS noise power
This MR implements the calculation of the noise power based on SRS in a
different way, and check whether SNR is more accurate or not. This MR is
built on top of the MR: !3460
A graph was added in T_Tracer to observe UL-SNR calculated using SRS.
See merge request description for measurement results.
Make all targets compile
This MR enables us to compile all targets, and does that in one CI test. This
closes#726. Now, this should work:
cd ~/openairinterface5g
mkdir build && cd build
cmake .. -GNinja && ninja
To achieve this, I did the following:
- some targets have been fixed (warnings, errors)
- some targets have been removed when they did not seem to serve a good purpose
(e.g., an almost empty test)
- some targets have been commented (e.g., LTE simulators, some unitary tests)
which we maybe want to revive in the future
- some targets built when just building with ninja, but not all. For instance,
telnetsrv_enb would typically build, but it was missing a dependency. Doing
cmake .. -GNinja && ninja telnetsrv_enb would show this (in develop)
To help with the last bullet point, there is a script compile_targets.sh that
can compile targets independently (and in parallel, to not wait for ages) to
show that targets compile properly compile-targets.patch.
In almost all cases, the problem is that a specific module uses the logging
module, which depends on T, which needs to dynamically create headers. The way
to do this is to have a dependency, and many targets use generate_T or {T_LIB}
({} intentional: T might be absent, so then it evaluates to nothing). However,
not all do this, and those that depend on T actually don't depend on T, but on
the logging module, which in turn depends on T. So in many places, a simple
dependency onto log_headers fixes this problem, and generate_T or {T_LIB}
simplifies the dependency (but not always). The commits should have more info.
Note that at least the targets in FlexRIC do not all compile, at least in the
configuration that we use in docker/Dockerfile.build.ubuntu. So for the latter,
we cannot build with a simple ninja, but FlexRIC seems to be the only one that
does not compile. Since FlexRIC is a separate repository, that needs to be
addressed in the corresponding repository.
These libraries depend on the logging module, so add the right
dependency log_headers. Indirectly, this will fulfill the condition of
T. I consider the prior usage of generate_T or {T_LIB} incorrect,
because basically none of these libraries actually, actively use T, but
rather only the logging module, which pulls in T. The dependency of
log_headers will also take care of generating and including T headers,
which is a dependency of the logging module.
For conf2uedata and related, fulfill the dependency
through conf2uedata_lib (on which the rest depends).
These libraries have no dependencies on UTIL, so it's better to omit it.
However, then the test is missing symbols for the config (which likely,
indirectly came through UTIL -> LOG -> CONFIG_LIB, so add it now onto
the test.
It seems that many compilation units include T.h through the config
module (as evidenced when taking out T.h from
config_load_configmodule.h). This is strange, because T.h is only used
in the logging headers. Hence, move it to there, where it is used.
common/utils/threadPool/measurement_display.c:55:14 warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘long long unsigned int’ [-Wformat=]
- Move QoS-related enums and structures from ngap_messages_types.h to 5g_platform_types.h
- Replace ngap_* QoS types with generic qos_* types for better reusability
- Update field names from allocation_retention_priority to arp for consistency
- Update all references across RRC and NGAP modules to use new type names
- Remove duplicate QoS type definitions from NGAP-specific header
This improves code organization by centralizing QoS parameter definitions
in a common platform types header and eliminates NGAP-specific naming
in favor of more generic, reusable type definitions.
The maximum number of QoS flows is 64.
- Replace QOSFLOW_MAX_VALUE with MAX_QOS_FLOWS constant
- Move MAX_QOS_FLOWS definition to common/platform_constants.h
- Remove duplicate QOSFLOW_MAX_VALUE definition from ngap_messages_types.h
This improves maintainability by centralizing the QoS flow limit constant
and eliminates duplicate definitions across different header files.
N2 handover
This MR introduces full support for N2 handover, covering handover
decision, preparation, execution, and notification between source and
target NG-RAN nodes.
Key features:
1. Handover Decision & Preparation:
- Implement N2 handover decision based on UE measurement reports.
- Generate the Handover Preparation Information message, including
RRCReconfiguration.
- Send Handover Required message from the source NG-RAN to the AMF.
2. Handover Execution:
- Decode and handle the Handover Request on the target NG-RAN.
- Process the Handover Command on the source gNB, triggering
RRCReconfiguration.
- Initiate Handover Notify after successful completion.
3 NGAP & RRC Enhancements:
- Implement NGAP encoding/decoding functions for Handover Required,
Handover Request, Handover Command, Handover Failure, and Handover
Notify (3GPP TS 38.413).
- Adds NG-RAN Status Transfer support (UL/DL) for PDCP COUNT
preservation during mobility:
- support for NGAP Uplink and Downlink RAN Status Transfer messages
(TS 38.413 §9.2.3.13-14) to enable proper PDCP COUNT value
transfer during handover or recovery: NGAP encoding/decoding for
RAN Status Transfer, PDCP helpers to extract and apply COUNT (HFN
+ SN) per DRB. This aligns with TS 38.300 §9.2.3.2.1 and TS 23.502
§4.9.1.3.3, ensuring PDCP status preservation in AM.
4. Testing:
- Introduce a Telnet command to manually trigger N2 handover using UE
ID and neighbor PCI.
- Add configuration file for testing N2 handover with a target gNB.
* the command gets in input the neighbour PCI and the UE ID
* the telnet ci function to retrieve the UE context was extended in the process
* add function to trigger handover on the same gNB for testing purposes
Co-authored-by: batuhan duyuler <batuhan.duyuler@firecell.io>
RFSim test for 10 UEs/process
This MR adds a testcase and changes required to run 10 UEs in a single
process with RFSim
- Added deregistration for all connected UEs
- Refactored MAC/RRC instance handling
- made map_current_symbol thread safe
- made opeanir0_cfg thread safe and local
- Added 10UE/process testcase
Some code in T tracers is used by both LTE and NR.
In LTE, we expect 10 subframes per frame, and the logging is done with
this assumption. We have one tick per subframe.
In NR, we deal with slots, not subframes. And we have n ticks per frame
(depending on mu). As of today, only n=20 is tested (corresponding to
mu=1).
A previous commit introduced 'subframes_per_frame' which had the correct
meaning for LTE but was truly 'slots per frame' for NR. This creates
confusion.
Let's replace 'subframe' by 'tick' to reduce confusion.
- Use MAX_NUM_NR_UE_INST in NR UE MAC to control number of MAC instances.
- Modify the MAC interface slightly so that nr_l2_init_ue only initializes one instance
RF emulator and improvements of the timers
RF emulator:
Add an RF library emulating a real device without the need of a real
device. This is thought to enable using phy-test without requiring a
radio device or channel simulation. The library synchronizes on the
real time clock, drops TX and generate noise on RX. Noise generation
can be disabled and the noise level configured.
Timers improvements:
- Fix standard deviation for merged timers
- Add display of ULSCH decoding timers
- Add decoding timer in AAL
Taps client for vrtsim
The MR allows vrtsim to connect to the Raytracing Channel Emulator (CE later).
https://gitlab.eurecom.fr/oai/raytracing-channel-emulator
Additional Ubuntu packages required:
- libnanomsg-dev
- flatbuffers-compiler
- libflatbuffers-dev
Everything was tested on the same host. Follow the steps below to
successfully replicate:
1. Build nr-softmodem dependencies
2. Build nr-softmodem for (gNB, nrUE) with OAI_VRTSIM_TAPS_CLIENTset to ON.
3. Start the core network (Optional) follow this tutorial
4. Start the gNB
sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.conf --gNBs.[0].min_rxtxtime 6 --device.name vrtsim --vrtsim.role server --vrtsim.timescale 0.5 --vrtsim.taps-socket ipc:///tmp/ru_socket_0
5. Start the nrUE
sudo ./nr-uesoftmodem -C 3619200000 -r 106 --numerology 1 --ssb 516 --band 78 --device.name vrtsim --vrtsim.taps-socket ipc:///tmp/ue_socket_0
6. Start the CE Server, once the UE and gNB are running properly, so the
server can connect to IPC sockets
7. Start CE client; the binaries can be downloaded from a pipeline run
or from this link
8. Move the UE in the CE client to generate a new taps array and
populate the taps in softmodems
Move the channel state management outside the channel implementation.
This simplifies the channel implementation but forces users of the
channel to manage it's state manually.
Add handling for error states in vrtsim which allows to close the
softmodems with CTRL+C without hanging, improving user experience
- Client detection of stale timer.
- Abort state for client and server
Robert Schmidt