[E2 agent] Refactor E2SM-KPM and implement support for REPORT style 1
- Refactor E2SM-KPM to:
- better handle different supported REPORT styles needed for "E2 Setup
Request"
- pass "Measurement Label" for calculating the measurement values
- Implement Subscription for E2SM-KPM REPORT style 1 and fill the PDSCH MCS
distribution measurement (CARR.PDSCHMCSDist)
- Fix the memory leakage caused by the UEs filtering based on NSSAI for REPORT
style 4
Tested successfully with and without ASan:
- in rfsim mode: gNB-mono, CU/DU and CU-CP/CU-UP/DU
- with the USRP B210: gNB-mono
and xapp_kpm_moni, xapp_rc_moni and xapp_kpm_rc xApps.
1. Allocate memory for the ue_id and ue_info_list arrays on the stack.
Explanation:
Every granularity period, the program passes through the fp_match_cond_type,
then through match_s_nssai_test_cond_type function pointers. Based on the node type,
the function used calloc() for these arrays.
=> the longer a connection with an E2SM-KPM xApp was, the more memory leakage occured.
2. If matched UEs > 0, only free the memory of ue_id content after each
Indication Message was sent.
Remove old CUDA LDPC implementation
A new implementation is under way in !3955. To simplify the MR, remove the old
LDPC CUDA implementation in a first step.
mac: fixes to prevent prb overlapping
- this patch fixes a bug in the MAC where the scheduled PRB resources can
overlap
- at the same time, we try to enforce the same semantics for "rbStart" (which
should be relative to the BWP) across the code as much as possible
UE: update pdcch config only after mib read
- In MR !3929, this change was done to call update_pdcch_config if mac
configuration is changed.
- Observed that the issue related to RAR after handover if SSB position changes
occurs also in develop 2026_w10 where MR !3929 is merged.
- update_pdcch_config should be done only after sync obtained.
- this fix is similar to the fix in initial commits of MR !3929
* Option to build ldpc_cuda was remaining in the build script
* Build script option to build ldpc_cuda was still used in CI
* Mentions of ldpc_cuda were remaining in the documentation
Note: In the documentation, the example of ldpctest usage that was
loading ldpc_cuda was replaced by an example in which it is loading
ldpc_orig even though this is pointless as it makes ldpctest compare
ldpc_orig with ldpc_orig. On the other hand, it is the only library
other than the default ldpc that uses the former interface.
Remove OSD, some scripts, oaisim references
The README says:
It is just generating the XML file and it is placing it in
$(OPENAIR_TARGETS)/SIMU/EXAMPLE/OSD/WEBXML/ or http://localhost/xmlfile/
so that the oaisim could pars and run the simulation/emulation
oaisim does not exist anymore, and corresponding simulation cannot be done.
Also, it requires XAMPP and similar technologies, that I think nobody uses
in the context of OAI.
Remove also most references to oaisim.
Remove some scripts that are likely not used by anybody, or straight useless.
Integration `2026.w12`
* !3985 Fix XNAP to avoid recompilation and unnecessary includes
* !3724 Better c style pss sss
* !3972 Resolve "Demote AssertFatal `PUCCH list is full` message to a warning"
* !3956 [FHI72] [xran F] Revert and simplify the code for Liteon FR2 interoperability
* !3970 Fix for NTN phy-test mode
* !3987 T: minor: remove target record_db from automatic building
* !3993 UE: Derive Serving Network Name from SIB1 PLMN
* !3997 vrtsim doc: clarify container requirements
* !3935 [FHI72] Fix long PRACH format
* !3998 Set rxgain to 0 in vrtsim
* !3964 CI: Add FHI7.2 phytest pipeline
* !4001 Remove unused ci-scripts/mysql4testresults/ dir and content
* !3999 bugfix: use proper pointer
* !3986 handle start symbol on non-zeroth downlink symbol for SIB1 for multiplexing pattern 3 configuration.
* !3957 replace static allocation of max antennas in a dynamic structure for gnb rach
* !3859 Delay compensation in SRS
* !3909 Adjust ssPBCH_BlockPower in FHI7.2 configs
Closes#1058
See merge request oai/openairinterface5g!3989
Adjust ssPBCH_BlockPower in FHI7.2 configs
ssPBCH_BlockPower is the average EPRE of the resources elements that carry
secondary synchronization signals in dBm. In OAI, the SSB is the same level
as all the rest, so we can compute ssPBCH_BlockPower from RU TX power and
bandwidth using:
ssPBCH_BlockPower = P_TX(dBm) − 10 x log10(N_RB x 12)
where:
- P_TX is the RU transmit power
- 24 dBm for indoor RUs (configurable on the RU)
- 35 dBm for outdoor RUs (configurable on the RU)
- N_RB is the number of resource blocks for the configured bandwidth
- 12 corresponds to the number of subcarriers per RB
replace static allocation of max antennas in a dynamic structure for gnb rach
NB_ANTENNAS_RX was used in 5G by mistake
there was also a error in O-RU implementation, with no consequences
(index not in right order)
Meson configuration was configuring a wrong maximum number of lcores on
the Arm platforms we are using (Neoverse V2 & NVIDIA Grace) as no
configuration is provided for these platforms with DPDK 20.11.9.
This commit solves this issue by requesting meson to use a generic
config that sets a high maximum number of lcores.
handle start symbol on non-zeroth downlink symbol for SIB1 for multiplexing
pattern 3 configuration.
This MR adds support for handling a non-zero start symbol for SIB1 when using
multiplexing pattern 3 with the per-slot CP format.
Previously, the implementation assumed that the first downlink symbol used by
a PDU always starts at symbol 0. However, this assumption does not hold for
SIB1 under multiplexing pattern 3, where the start symbol can be non-zero.
This issue does not apply to the per-symbol CP format.
Testing:
a. Microamp using the branch microamp_1048: UE registration ok. end-to-end ok.
b. Benetel: UE registration ok. end-to-end ok.
xran needs to be informed about the cores to use for packet processing.
Prior to this change, we only filled the first 64bits, but it can go up
to 128 in xran. Change the helper accordingly to support all.
The README says:
> It is just generating the XML file and it is placing it in
> $(OPENAIR_TARGETS)/SIMU/EXAMPLE/OSD/WEBXML/ or http://localhost/xmlfile/
> so that the oaisim could pars and run the simulation/emulation
oaisim does not exist anymore, and corresponding simulation cannot be
done. Also, it requires XAMPP and similar technologies, that I think
nobody uses in the context of OAI.
PTRS phase error is estimated in each symbol and should be compesation in the
last symbol. So far nr_dlsch_llr() used rxdataF_comp before PTRS phase
correction for all symbol except the last one. This commit fixes it by calling
nr_dlsch_llr() for all symbols after rxdataF_comp is compensated for PTRS phase
error. To do so, dl_ch_mag arrays are moved out of nr_rx_pdsch() to hold values
of all symbols.
put symbol index as first dimension. It is necessary because the offset for
the buffer to start of a symbol can be arbitrary and hence not aligned to 32
byte boundary. Having each symbol in a separate dimension ensures alignment.
CI: Add FHI7.2 phytest pipeline
This MR consists of multiple changes related to FHI7.2 setups in CI.
- remove unused fhi72 configurations in CI
- introduce dpdk-init service in fhi72 deployments to setup sriov on the machine
- update phytest fhi72 configurations for running on bulbul
- add phytest fhi72 to RAN-SA-FHI72-CN5G pipeline
Set rxgain to 0 in vrtsim
Set rxgain to 0 in vrtsim to match rfsimulator behavior
This addresses the issue where RSRP is different between rfsim and vrtsim. With
this RSRP values between rfsim and vrtsim should be similar.
[FHI72] Fix long PRACH format
The problem was that xran_is_prach_slot() compared if the current slot is the
scheduled one. However, this becomes irrelevant if long PRACH format used.
Successfully tested end-to-end the PRACH index 7 with TDD DDDDDDDSUU and Benetel
v2.0.5.
- Introduce dpdk-init service for SR-IOV initialization within the container
- Execute script to enable low-latency RT performance (restored after tests)
When running phytest with FHI7.2 in Docker, two services are deployed:
dpdk-init and oai-gnb. Previously, AnalyzeRTStatsObject selected the
first deployed service for RT stats analysis.
Allow to explicitly select the service used for RT stats analysis instead
of relying on the first deployed service.
Jaroslava Fiedlerova