Add gold sequence cache with dynamic size, private to each thread. It
periodically reorders by call rate. To free the gold sequences after end
of life time of a thread, use the pthread API.
This assert and assumption is incorrect, according to 38.101-1 UE channel is defined only by the BWP size
and BWP size can be any value supported by the RRC parameters defining the BWP.
To determine the UE channel the smallest bandwidth supporting the BWP is selected. This is an assumption based
on references in the same document to UE channel bandwidth being equal to one of the values in set
{5, 10, 15, 20, 25, 30, 35, 40, 50, 60, 70, 80, 90, 100}.
Also:
- calculated P_CMIN during BWP setup since the parameter doesn't depend on DCI.
- initiialize uniqCfg structure in test_nr_ue_power_procedures main function which enables LOG prints during tests
- if search fails, keeps increasing the rx gain (set by --ue-rxgain) by
3 db until USRP max rx gain
- if initial sync is success, sets the rxgain to the value of
(TARGET_RX_POWER (50) - pbch digital power in dB/RE)
* the mismatch between UE capabilities, passed to PHY by NFAPI PDU, and --ue-nb-ant-tx
causes a segfault in SRS modulation
* issue with indexing txdataF[p_index], which fails due to an out-of-bounds access
since first dimension of txdataF is sized based on ue->frame_parms.nb_antennas_tx
* N_ap used in SRS modulation is based on the number of antenna ports
in the SRS configuration (srs_config_pdu->num_ant_ports)
Integration: `2024.w28`
See merge request oai/openairinterface5g!2856
* !2847 UE setting wrong frequency in 5G rfsimulator SA test
* !2850 NR UE MAC DCI 00 BWP handling
* !2852 \[E2 agent\] Move UE RRC_CONNECTED state signaling
* !2851 Minor code cleanup and fixes
* !2842 UE assertion for msg1_SubcarrierSpacing in RA
* !2831 PUSCH power control state
* !2838 NR UE UL FAPI PDU length fix
* !2723 add initial NTN support for NR UE
* !2764 Adding 7.2 containerfiles and docker-compose
* !2827 Increase RX_DATA.indication PDU Length to 32 bits
Until commit d74b2bd19f, the PSS detection step size was 4, anyways.
The PSS detection step size is a compromise between detection duration and accuracy.
The most accurate detection step size would be 1, but this would lead to even longer initial sync time.
- Introduced command line and configuration options to set up PCI address, CPU cores used by DPDK, and DPDK file prefix for T2 offload.
- Made the dpdk_dev parameter (for setting the PCI address of the T2) mandatory.
- Configure dpdk_dev in the CI test cases.
- Replaced bbdev TEST_ASSERTs with the OAI macro AssertFatal() to harmonize error handling.
- Removed unused functions and macros from nrLDPC_offload.h.
- Reworked nrLDPC_decoder_offload.c to process all segments in a TB with a single call to LDPCdecoder() or LDPCencoder().
- Perform CRC checks on the T2.
- Modified nr_ulsch_decoding (gNB decoder) to:
- Count processed segments.
- Properly perform CRC checks.
- Created a constant NR_LDPC_MAX_NUM_CB to define the maximum number of codeblocks.
- Conditional library loading:
- On gNB: Load ldpc_t2 library if offload is enabled using the --ldpc-offload-enable flag.
- On UE: Load both ldpc_t2 and ldpc libraries since only encoder offload is supported.
- General cleanup of nrLDPC_decoder_offload.c for improved readability and maintainability.
- Modified the structure of LDPC encoder/decoder/offload parameters:
- Introduced a structure for code block (CB) related parameters.
- Removed parameter E from the encoder and offload parameter structures for clarity.
- Replaced E with perCB->E_cb in the UE encoder code.
It seems libatlas-base-dev provided an `enum CBLAS_TRANSPOSE`, but we
don't install it anymore. Now, in Ubuntu, there is only a typedef'd
version in cblas.h; for RHEL(-derivatives), the same typedef'd version
is in cblas/cblas.h.
Laurent THOMAS