In some pipelines, it happens that iperf3 is hanging on 100% CPU load.
In these cases, a simple TERM signal does not seem to be enough to kill
it; KILL is necessary.
While e.g., RemoteCmd's driver paramiko has a timeout command, the
documentation [1] is not really clear how it is trying to stop commands.
Since it effectively does not stop, we have to assume it is only sending
TERM.
To remedy this, use the timeout command to start iperf3. We use option
-v for diagnose timeouts on stderr, and send KILL after an additional 3
seconds (-k3) if TERM does not succeed. The timeout is sent to the same
duration as the overall iperf timeout.
[1] https://docs.paramiko.org/en/3.4/api/channel.html#paramiko.channel.Channel.settimeout
A to-be-added UE's RA is added through nr_mac_add_test_ue() (the name is
misleading, it is not a "test UE") through its CellGroupConfig. Using
the process_CellGroupConfig() is unfortunate, because it is not really
clear what part of the CellGroupConfig gets evaluated (it is certainly
not all). Move the code for adding a new RA directly in the user-add
function, and refactor this one.
Introduce new LC configuration "priority", as specified in 38.321, and
use to sort LCs by priority. We set the priority of an SRB according to
38.331 Section 9.2.1, and for a DRB to be the minimum priority of the
QoS flows associated to this DRB.
Introduce new functions to add/release LCs without needing to go through
the intermediate CellGroupConfig. This harmonizes LC handling at the "DU
handler" to keep it consistent with RLC bearer handling.
These functions allow to group LC configuration handling, and we can
remove functions for setting NSSAIs and QoS by handling in one central
place (while adding LCs).
nr_mac_add_test_ue() is used by simulators and also in NSA mode to add a
new UE. Ideally, these users should also call the ue context setup
request handler to add a UE context; for the moment, respect the passed
list of LCs to add. Similarly, for do-ra, we require a dedicated
function to still parse the CellGroupConfig, so we keep that part of
functionality.
On reestablishment, since we do not process the CellGroupConfig from the
old UE, we need to add LCs for the new UE based on the onces from old
UE.
Use a common structure nr_lc_config_t to group LC configuration for one
logical channel. Use seq_arr for simple lookup, adding, removing of
elements without manual indexing logic.
This commit retains the previous logic of adding/releasing LCs through
the process_CellGroupConfig(), although we know while building the
CellGroupConfig if we add/release LCs. The next commit fixes this.
If we do not make this change, with the next commit, we get the
following error from gcc:
openair2/E2AP/RAN_FUNCTION/O-RAN/ran_func_kpm.c:299:46: error: assignment of read-only location '*(arr_ue_id.ue_info_list + (sizetype)(arr_ue_id.sz * 2444864))'
| arr_ue_id.ue_info_list[arr_ue_id.sz] = *ue;
In a later commit, we will use find_if in L2. In the case of building
with E2 agent, we link e2_agent which comes with its own implementation
of find_if_arr(), which results in a name clash. Rename the OAI
implementation, as nothing uses this, anyway.
- addition of control of deltaMCS if enabled in configuration file.
- introduce separate parameter to disable 256QAM in UL
- put min_grant_prb configuration back in pf_ul() as default prb size.
Integration: `2024.w21b`
Closes#734
See merge request oai/openairinterface5g!2755
* !2700 Fix UE PUCCH multiplexing infinite loop
* !2724 Correct PRACH preamble tx power calculation.
* !2726 NR SA Tutorials
* !2728 Use existing function for bits reversal
* !2732 CU handle F1 setup Req- TAC conversion
* !2738 Correct data offset for unscrambling in PUSCH processing
* !2742 UE: fix mutex locking verification
* !2737 rename persisted ul harq status per pid with a uniq name, make better mutual exclision of processSlotTX()
This reverts commit 0d0e111135. It was
set to UE RX to TX time to 2 as it was deemed that the UE could sustain
this time. However, we noticed a degradation of performance, so reset
the RX to TX time to something higher to ensure proper performance.
Integration: `2024.w21`
See merge request oai/openairinterface5g!2746
* !2717 Additional check on pucch_Config and srs_Config
* !2730 Fix for SSB index in function get_nr_prach_info_from_ssb_index
* !2734 add a function to reset the transmission timestamps chain
* !2741 Fix several potential segfaults in UE PUCCH tx power determination.
Robert Schmidt