- configure_fapi_dl_pdu is handling the nfapi_nr_dl_config_request_pdu
- while configure_fapi_dl_Tx is now handling the nfapi_tx_request_pdu
this was necessary because the computation of the TBS size is needed in the phytest scheduler
before even knowing if there is any data to transmit. The tx_request_pdu must be handled instead
only when there is data to transmit.
The timer code used to trigger periodic statistics message sending used
ITTI. Together with a high frequency reporting (e.g. 1ms), this resulted
in high CPU usage. This commit reimplements this:
* using a thread that is synchronized to the RU (if there is no MAC, we
assume there is no RU generating a tick so we create the tick source
ourselves)
* no RB trees but plain arrays
* smaller interface for users
* slight user interface changes
* remove stopped timer state: such timer might be simply removed
* remove one-shot timers
-New MAC SDU integrity check in ue_procedures .c introduced for MCH channels.
-This SDU behavior didn’t show up with former develop
-TOCHECK whether NFAPI was properly merged on the eNB side.
-eNB_scheduler_mch has been slightly rearranged.
*BUGFIX:
-In dlsch_demodulation.c “ rxF_comp_d.m” was continuously being written to disk
*New reference config file added (lte-fdd-mbms-basic-sim.conf) for rfsim environment
- physical simulators
- LTE eNB
- LTE UE
- 5G-NR gNB
Still NR-UE does not build and eNB segs fault at start of program
Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>
M3AP ASN1 source spec updated
ACKNOWLEDGEMENT:
1. This commit was developed at Vicomtech (https://www.vicomtech.org) under UE project CDN-X-ALL: "CDN edge-cloud computing for efficient cache and reliable streaming aCROSS Aggregated unicast-multicast LinkS"
2. Project funded by Fed4FIRE+ OC5 (https://www.fed4fire.eu)
Signed-off-by: Javier Morgade <javier.morgade@ieee.org>
MCH channel level calculation reformulated according to DLSCH
ACKNOWLEDGEMENT:
1. This commit was developed at Vicomtech (https://www.vicomtech.org) under UE project CDN-X-ALL: "CDN edge-cloud computing for efficient cache and reliable streaming aCROSS Aggregated unicast-multicast LinkS"
2. Project funded by Fed4FIRE+ OC5 (https://www.fed4fire.eu)
Signed-off-by: Javier Morgade <javier.morgade@ieee.org>
- merged nr-schedule_ue_spec into nr_schedule_uss_dlsch_phytest
- enabled nr_ue_send_sdu for S1 mode
- increased ta_timer to 100
- restored NR_UPLINK_SLOT to 2 (as it was in develop-nr)
- fixed logic for S1 and noS1 modes
- code cleanup and formatting
- introduced new parameter in nr_ue_dl_indication for UL time alignment
- moved TA timer logic one level up so that now is executed every slot
- set timer value to 80 slots to cope with the sl_ahead design
- introduced new TA-related members to gNB MAC instance struct
- ta_timer at gNB side to control the transmission of TA to the UE. This is now happening every 20 slots.
- when the timer resets gNB is now transmitting the TA whether it is zero or not.
- introduced struct NR_UL_TIME_ALIGNMENT_t to handle configuration of time alignment related parameters.
- UE PHY RX: is now triggered through a flag when to store the TA command, the frame and slot
when the application should occur.
- UE PHY TX: when the tx frame and slot match the time alignment configuration, it process the TA command and applies the
TA update
- "nr_process_timing_advance": TA to be applied is commented out, need to be uncommented
- with introduced delay of 50 in rx_rf, TA update should be 34 in MAC CE
but this does not occur when ta is applied at UE side according to standard
- introduced ULSCH scheduler and NR RX SDU functions
- fixes to logic in UL fill RX indication
- added crc indication in UL RX
- temporary hardcoded UE_id to 0, rnti not considered in the logic
- Initial gNB DLSCH and UE spec scheduling implentation
- MAC PDU generation (including header as per TS 38.321)
- MAC PDU processing at UE side with extracion of TA updates
- General code cleanup
- Introduced NR MAC COMMON folder, moved common files here
Raphael Defosseux