This function applied an sf_ahead, bigger than the actual slot
indication message sending (so a message could NEVER arrive on time!).
Reduce to zero, because this is when it should arrive for us.
FAPI says these lists should be for MAX_TDD_PERIODICITY (which is maybe
a frame, or a TDD period? but likely not two frames). Reduce to one
frame.
Also, the nFAPI code assumes one entire frame, so use that (this commit
necessary to actually make the PNF work, otherwise, the
packing/unpacking of the FAPI message would need to do 2 frames).
Closes: #876
Upon reception of FAPI UL messages (e.g., RACH.indication), those
messages are put into queues, to be delivered in a single call,
NR_UL_indication(). Call the scheduler to trigger processing in UL.
Note that ideally, these queues should not exist at all, and messages
should just be delivered asynchronously, as this would lead to less
copying of messages. Currently, we fulfill the scheduler interface
instead.
Important! Trigger UL after having run DL scheduler and sent the
messages, to ensure short delay between Slot.indication, and the
response to those messages.
The previous designs seems to do:
loop {
poll_ind_queue()
if (msg)
scheduler;
pselect() on messages;
handle_message {
if slot_ind
put_ind_queue()
}
}
So basically, we artificially put a queue for slot indications in the
middle, but still handle it in the same thread(!). This for some reason
results in a big slow down if the PNF runs faster.
Now, we just do pselect(), waiting for messages. We handle the slot
indication immediately (the schedule should take some microseconds),
then return to pselect().
Use this function to implement distinct behavior for monolithic or PNF:
- monolithic: run the scheduler, as normal
- PNF: send a slot indication; the VNF will send an answer which the PNF
will handle elsewhere.
Add function declarations to make nr_ulsim compile, as NR_IF_Module.c is
part of the MAC sources. As of now, this is necessary; I think the right
way would be to take NR_IF_Module.c out of the MAC, and make this a
"glue" library that sticks L1 and L2 together, in monolithic (in VNF, in
that case, we should not link in L1, and for the PNF not the L2,
creating separate executables... Rome was not built in one day).
We are required to store multiple PUCCH (e.g., for multiple UEs).
However, nr_fill_pucch() automatically freed the previously active PUCCH
structure. Of course(!) this does not make sense.
However, the problem is that init_nr_transport() allocated only one
PUCCH structure. Also this does not make sense to me. The problem was
that slot_ahead was 0, which logically cannot happen in this function
(because slot_ahead is illogical, we must give the radio some time). The
reason is that it uses if_inst->sl_ahead, which, prior to this commit,
was not set.
The init_nr_transport() function is called normally from main() through
init_eNB_afterRU(). In this case, we initialize if_inst->sl_ahead to
what is set in main(). In the PNF case, however, we call
init_nr_transport() from the PNF thread, when receiving the start
request. In the main(), we wait for this to happen, before setting
if_inst->sl_ahead. Hence, initializing this variable (which we should
safely be able to do) before solves the problem.
The radio gives the clock. Therefore, we do not need to keep the time
separately in the PNF.
Also, the VNF should not run the ru_thread, as this is an L1 thread.
This is to align with monolithic/FAPI, where we get slot indications in
each slot. In the nFAPI, this is replaced by timing information, such
that the VNF ticks automatically, and gets indications from the PNF on
early/late messages. The timing information handling is not implemented
in the present nFAPI implementation. Instead, we adopt the FAPI behavior
and send timing information in every slot, abusing it to be a slot
indication.
There is no need to add the PNF in nr_start_resp_cb(), because it has
already been done in nr_param_resp_cb(). This might be wrong, because 4G
does it only in nr_start_resp_cb(), but for the moment, since it is also
used in nr_param_resp_cb(), avoid the double add.
The same function is called in nr_start_resp_cb(), why there and not here?
At reception of nr_param_response, we receive the remote PNF information
on PNF/VNF. We have to store it.
In nr_start_response, it might not be correct and/or can be taken out.
The next commit will remove it.
Now uses RC.nb_nr_L1_inst instead of RC.nb_nr_inst in order to configure the L1, since in PNF RC.nb_nr_inst is always 0, and so, it wouldn't configure the L1
Integration: `2025.w03`
See merge request oai/openairinterface5g!3206
* !3167 remove calls to clear SIMD registers, that was a historical issue
* !3179 UE statistics improvements
* !3193 Remove spinlock from threadpool task return
* !3195 UE MAC: in phy-test/do-ra, fill TB randomly
* !3201 T tracer: minor fixes for compilation
* !3204 CI: Increase number of test trials for timing tests
* !3034 Delay compensation for PUCCH2
* !3205 Fix calculation of RSSI in pucch_rx.c
Fix calculation of RSSI in pucch_rx.c
Fix two issues with RSSI calculation in PUCCH:
- RSSI was calculated using partial sum instead of average of squared samples.
- There was a missing parentheses pair which causes the RSSI value to underflow.
The proper way to calculate power in dBFS is
let signal_energy = average of squared samples of received signal over resource elements, antennas and symbols under measurement
then:
rssi[dBFS] = -10log10(max_sample^2 / signal_energy),
or (to avoid division):
rssi[dBFS] = -(10log10(max_sample^2) - 10log10(signal_energy))
CI: Increase number of test trials for timing tests
- Increasing a number of test trials aims to reduce variations and
improve reliability of the nr_ulsim and nr_dlsim test results.
- Disable CPU sleep states on the machine when running physims.
- Minor adjustment of timing threshold in 60 MHz phytest.
Delay compensation for PUCCH2
- Implementation of delay compensation for PUCCH2, which minimizes for
exampe logs "reported RSRP index XXX invalid"
- Adding a test to the CI to perform the delay compensation in PUCCH2
- Refactor code to use c16_t data type in PUCCH decoder
Remove spinlock from threadpool task return
The idea to use atomic aligned to cache line for counting finished jobs
is reused, but instead of polling a semaphore was added.
remove calls to clear SIMD registers, that was a historical issue
This works because gcc/clang replaces the MMX calls by SSE2 automatically.
There are some mm_empty() calls in bad places (places where we don't use
_m64) and it is lacking in places where we still use _m64. Given that
MMX calls are converted to SSE2, there is no problem, and we will remove
remaining _m64 variables.
Fix two issues with RSSI calculation in PUCCH:
- RSSI was calculated using partial sum instead of average of squared samples.
- There was a missing parentheses pair which causes the RSSI value to underflow.
The proper way to calculate power in dBFS is
let signal_energy = average of squared samples of received signal over resource
elements, antennas and symbols under measurement
then:
rssi[dBFS] = -10log10(max_sample^2 / signal_energy),
or (to avoid division):
rssi[dBFS] = -(10log10(max_sample^2) - 10log10(signal_energy))
Robert Schmidt