Increase the number of aggregration level candidates. Since we have many
UEs with concurrent traffic in that pipeline, we should ensure that we
can allocate many DCIs to not waste resources (e.g., not all RBs used
because could not find DCIs for specific UEs).
Add the possibility to use UL slots in TDD pattern 2. For simplicity, we
require the mixed slot to be of the same symbols in pattern 1 & 2. For
UL slots, simply use the right amount of UL TDAs, depending on which
number of UL slots among pattern 1 & 2 is bigger.
One complication is the TDA for the mixed slot. The current code assumes
that k2 has to be equal or larger than (number of DL slots +1) (because
the spec says min k2=2, but we might want to schedule DSUUU). Then,
there could be for instance the following cases:
- only pattern 1: DSUUU DSUUU ...: the mixed slot has to be reached an
entire period in advance
- pattern 1 & 2: DSUUU DDDDD: normal mixed slot k2, e.g., like for 7DS2U
- pattern 1 & 2: DSUUU DDDSU: the mixed slot has to be reached
N_ul2+N_dl1+1 slots in advance
I can't think of more cases right now. To avoid unscheduled slots, I put
an assertion (which could also trivially be taken out).
Adds the capability to pack/unpack the TDD table in CONFIG.request
following both SCF222.10.02 (Tag 0x1027) and SCF222.10.04 (Tag 0x1035)
formats In the case of Aerial, the TDD table is packed following the
10.04 format, but with the 10.02 tag Prevent the packing of Digital
Beamforming table and Precoding Matrix table for Aerial
A new function get_best_ul_tda() allows to select the "best" TDA out of
a number of TDA. Specifically, get_best_ul_tda() considers in how many
RBs a given TDA might be allocated, and multiplies this number of RBs
with the number of symbols in the TDA to form a "score". The TDA with
the best "score" is selected, considering it maximizes resource usage.
In phytest scheduler, we use this function to verify that the given TDA
can be really allocated in all selected slots.
Schedule SRS longer in advance, so that it would also be enough even
with big k2 for UL TDA.
Remove useless types: we do not use the information on sched_srs
anymore, so remove it.
Check that the VRB map is free before making allocations.
Since the parent commit, the TDA for UL scheduling is dynamically
selected, instead of being hardcoded to specific indices. We can thus
also omit the SRS TDA if no SRS is configured.
Also add SRS-specific TDAs if we schedule further into the future.
Add multiple TDAs with k2 larger than the min_rxtxtime, to potentially
allow to allocate all available slots. For this, nr_rrc_config_ul_tda()
inspects the TDD pattern, and allocates as many TDAs as necessary. It
also sorts the TDA list, with smaller k2 and larger symbol lengths
first.
This in turn is now used by get_num_ul_tda() to use a k2 and the slot
configuration to find a suitable TDA, assuming a list as sorted in
nr_rrc_config_ul_tda().
Note that since get_num_ul_tda() does only inspect the available UL
slots, there might be overlap (e.g., when scheduling SRS), which will be
fixed in a follow-up commit.
Also, TDD pattern 2 is not handled here yet, and a follow-up commit will
fix it.
Add a loop to advance slots as determined by current ("DL") slot, and
advance further into the future (for "UL" slots) if TDAs allow. Ensure
to schedule all TDAs if it's the last DL slot, to guarantee a previously
scheduled TDA will also reoccur (i.e., for guaranteeing that
retransmissions can be made).
Note that the check for number of UE being zero is removed, as this
allows to keep "ul_next" close to the "min_next" slot. This way, we can
use fs_get_max(); otherwise, if we did not always execute this loop,
they might diverge far from each other, making the logic inside the loop
more complicated.
This commit introduces a new type "fsn_t" (frame-slot number) that
encapsulates a single frame-slot combination in a single struct. The
helper functions (in gNB_scheduler_ulsch.c) should be moved to a new
file under common/, but we don't do this here to limit the amount of
code changes.
For scheduling multiple ULSCH ahead, we will have to use different k2.
Hence, we will need to check for k2 in the TDA selection as well. The
function get_ul_tda() is renamed to get_num_ul_tda() to reflect that it
might return multiple TDAs (not done in this commit, but in a follow-up
MR). get_num_ul_tda() also returns a pointer to the first suitable TDA.
In the phy-test scheduler, simplify the selection of the TDA to use: do
not hardcode a specific K2, but rather, use the first one (with any k2).
For the multi-UL slot scheduling functionality in a follow-up commit, it
would be important to know if the scheduler allocated any UEs. If
pf_ul() allocated for some UEs, we might run it again on a different
slot. If on the other hand, no UEs were allocated, there is no point in
running it again.
A dedicated Msg3 TDA is simply not necessary: get_feasible_msg3_tda()
already iterates through all TDAs to find a suitable one for Msg3, and
takes things such as parameter Δ already into account.
The only prerequisite is that the ra_ResponseWindow is long enough. In
some configurations, Msg3 TDA ensured that Msg2 still happened during
ra_ResponseWindow, while Msg3 was outside of it. This is not necessarily
the case anymore, unless ra_ResponseWindow is long enough.
For the normal user, removing ra_ResponseWindow from the config will be
enough.
Since the parent commit, the ra_ResponseWindow will be chosen
automatically. Correspondingly, remove most ra_ResponseWindow options
from configuration files in the repository.
One problem in some mu=1 configs is that the ra_ResponseWindow=4 (10
slots), which might be overly restrictive if the L1 slot ahead is
somewhat close to 10 (e.g., 6), in which case we might not be always
able to allocate Msg2 in time.
A notable exception here is gnb-vnf.sa.band66.u0.25prb.nfapi.conf, in
which we still provide it (1) since it uses a non-standard configuration
of a ra_ResponseWindow longer than 10ms (see also issue #916 for more
information) and (2) as an example.
If the config file does not specify ra_ResponseWindow, select it to be
10 slots in mu=0, or 20 slots for all others.
This should give us enough flexibility to allocate Msg2 without running
out of the response window. The next commit will remove most
ra_ResponseWindow options in configs.
Scheduling for inactivity only deviates in details from the main
scheduling logic: we simply allocate a fixed number of RBs instead of
making it dependent of data.
In this commit, add an additional flag to sort UEs that are scheduled
for inactivity in front of "normal" UEs (with traffic). Then, schedule
those UEs by limiting/fixing the amount of RBs to schedule to
min_grant_prb.
Update the comparator() to properly sort UEs based on this flag and the
coefficient by applying a consistent logic of -1/0/1 (see man qsort) for
smaller/equal/larger. The inactivity flag, if set, will always have
higher priority over the coefficient to schedule these UEs first, as was
the case prior to this commit.
Remove sched_ctrl->sched_ulsch, and call the post-processing function
post_process_ulsch() in the places where sched_ctrl->sched_ulsch has
been assigned. This will have two effects:
- it is not necessary to have the final loop over all UEs, which might
be costly especially towards many UEs.
- till now, there is only a single sched_ulsch; however, a later commit
will allow to schedule multiple PUSCH transmissions from a single (DL)
slot. This would require to make sched_ctrl->sched_ulsch, and
also iterate through all sched_ulsch. In this new scheme, we can
simply call post_process_ulsch() multiple times, which is simpler (and
therefore, implicitly handleded as of this commit).
Write a single NR_sched_pusch_t structure in a single statement (where
possible). Assign to sched_ctrl->sched_pusch later, where the
post-processing functionality will be called in a follow-up commit.
Write a single NR_sched_pusch_t structure in a single statement (where
possible). Assign to sched_ctrl->sched_pusch in one place, where the
post-processing functionality will be called in a follow-up commit.
Avoid to overwrite the existing retInfo. Instead, create a new
NR_sched_pusch_t and assign to sched_ctrl->sched_pusch in one place. A
follow-up commit will directly trigger the post processor here.
Write a single NR_sched_pusch_t structure in a single statement (where
possible). Assign to sched_ctrl->sched_pusch in one place, where the
post-processing functionality will be called in a follow-up commit.
PF uses MCS and average throughput to decide which UE to schedule. Thus,
the first loop selects the MCS, and the second does the main UE
allocation after sorting by priority, depending on the MCS.
A follow-up commit will remove sched_pusch from NR_UE_sched_ctrl_t.
Thus, we cannot rely on sched_ctrl to store the MCS in the first loop,
and look it up from there in the second. Instead, store it as part of
the UE iterator data, and take it from there.
A later commit will remove sched_ctrl->sched_pusch. Instead, the TX
power is also stored for each HARQ process (as they contain
sched_pusch). Read it from there, which should have the same effect.
Introduce an array with information on FAPI structures to save resource
allocation into. It's in nr_mac_gNB.h because the next commit reuses
this for all preprocessors.
feat(LDPCImplementation.md): Fix documentation
Few ambiguities and outdated names were found in the LDPC documentation
by Vlademir Brusse (see in the devel mailing list).
- Outdated names of the functions of the segment coding interface.
- Ambiguity about loading of the segment coding libraries.
Fix Dedicated BWPs
- Improve SearchSpace selection
- Improve CORESET selection
- Fix fill 'initialDownlinkBWP->pdsch_Config' when there are
DedicatedBWPs
* This fixes the reported 'RSRP = 0' issue when the UE is in the
InitialBWP and we have DedicatedBWPs configured
- Add a 'common' type SearchSpace in the NR_BWP_DownlinkDedicated IE for
DedicatedBWPs
- Fix hardcoded 'controlResourceSetId' by making it dynamic
- Remove 'searchspaceid' from 'verify_agg_levels' function because it
was used only for LOG
- CI: Add DedicatedBWP to '40 MHz TDD F1+E1 SA' in
'RAN-SA-B200-Module-SABOX-Container'
Fix overflow when negating minimum int16_t value in precoding
This closes#955
It prevents undefined behavior caused by the minimum int16_t value
(-32768) in two's complement representation. Because possible negation
by multiplying with -1 during precoding cause an overflows since +32768
cannot be represented in 16-bit signed integers and end up again in
-32768 because of overflow, here reveald by using the SIMD functions.
Workaround we use a slightly smaller number than 1 in Q15 Format to
prevent this error. Q15 representation of (integer value -32767) -1 +
2^-15 = -0.999969482421875
remove specific directory for LTE SIM management tools
This is very old code has never been integrated with the "main" OAI
cmake infrastructure and more recent libraries.
This MR integrates the three binaries for LTE virtual sim management in
the regular build process and log system
Following frequency change in the pipeline, we observed degraded UL channel
conditions resulting in low UL throughput. Increasing attenuation on the gNB
side was found to mitigate this issue by improving UL channel quality
and reducing UL noise power.
Increase tested UL and DL bitrates in OAIUE pipeline.
Robert Schmidt