Notably, remove asn_codecs_prim_xer.h from the list of files, triggering
problems when re-running ninja, because the "canonical OAI asn1c"
(https://github.com/mouse07410/asn1c, commit ID
940dd5fa9f3917913fd487b13dfddfacd0ded06e) does not generate it:
ninja explain: output openair2/XNAP/MESSAGES/asn_codecs_prim_xer.h doesn't exist
In this version, a couple of files are not generated, so remove them
from the list.
Also, leave the files in the order as shown by ls.
Integration `2026.w11`
* !3864 remove xran_fh_tx_send_slot_BySymbol() and xran_fh_rx_read_slot_BySymbol()
* !3967 Harmonize the use of definition for number of symbols per slot
* !3971 Limit dl_DataToUL_ACK values to 15 as per standard
* !3414 Added NTN-FR2 FDD bands defined in release 18 in Ka-band range
* !3919 Reduce number of mutex locking in MAC->RLC direction
* !3923 XNAP: Add encode/decode and unit tests for Xn Setup Request/Response/Failure
* !3965 Enable BladeRF support in gNB Docker image
* !3904 add multi-ue support to vrtsim
* !3980 SDR reordering: correct warning, and USRP: return samples written
* !3834 Use flat buffer for txdataF in gNB L1
* !3981 Bugfix: make longer telnet cmdfunc names
* Reduce timing reference value for feptx_total in 40 MHz phytest
See merge request oai/openairinterface5g!3976
The maximum number of cmdfunc names is 20, which IMO is too low. Worse,
if it's longer, nothing will warn us because C will just fill the array
to it's end (without \0 at the end). To remedy this:
- Allow longer names till 64 bytes (I hit the previous limit of 20)
- Check that the name is within the length limit: if somebody wants a
very long name, the strnlen() will return the maximum length, hitting
that assertion.
- When reading a command during runtime, allow the corresponding maximum
length.
On that occasion, also increase total number of permitted cmdfuncs.
The original error was simply "failed to write to RF", which is not very
precise. Update with sample numbers for context, and add it in another
similar case for consistency.
Co-authored-by: Sagar Arora <sagar.arora@openairinterface.org>
At least writerProcessWaitingQueue() checks for the exact number of
samples written. In many other places, we check that the return is
non-zero.
The usrp-tx-write-thread functionality returned 0, which triggers
various problems. Return the number of samples, as in the "direct write"
case (if-block before else-block).
Co-authored-by: Sagar Arora <sagar.arora@openairinterface.org>
Adds the API, which will always prepend a 3 byte header before writing a
PDU. This can be used to call less often into RLC, and avoid potential
locking.
The API is used at the gNB DLSCH scheduler. Also, this removes the
"overhead" calculation: since we fill the entire TB at once, RLC will
leave space for headers as necessary.
This extends the functionality provided by record in that it allows
collection of data into a Clickhouse database, allowing aggregation of
data from gNB and UE for functions like channel estimation for PUSCH
transmissions that did not decode successfully at the gNB.
It is intended to be used in conjunction with Aerial Data Lake but is
not limited to it. Data access is simpler than in !3462, but could be
improved using the metadata approach from !3462.
The integration uses logfmt for fast logging, and a clickhouse DB
client, both integrated using CPM.
This change set also adds a docker-compose file for a UE on 100MHz, to
be used with Aerial configurations, and builds the tracer for Aerial and
nrUE docker files.
Ubuntu 20 is EOL [1] unless people pay for support. Therefore, remove it
from build_helper. People can still use it, but might need to install a
more recent cmake version (which the next commit will upgrade). The rest
should be the same.
[1] https://ubuntu.com/about/release-cycle
Integration `2026.w09`
* !3944 Fail early if configuration module can not initialize properly
* !3945 gNB: Reset NDI only after usage in case of disable HARQ
* !3822 NR UE: fix PRACH k1 calculation at MAC when handover
* !3874 print better message for rsrp: invalid doesn't mean it is not measures, it...
* !3928 NR UE: correctly compute writeTimestamp for SCS > 30 kHz with rf-simulator
* !3949 fix: removed the nssai_sd parameter in the ue.conf file
* !3897 Change Aerial config file in targets to match Nvidia's CI setup
* !3951 Fix handling of IPv4v6 PDU sessions
* !3940 IPV6 support for telnet socket binding
* !3947 Add missing packing for CONFIG.request parameter BetaPSS
* !3871 Support for up to 12 ports in NR gNB
* !3943 Remove L1 dependence from NR band number
* !3892 Synchronize multiple gNBs by aliging their the slot boundaries
* !3952 Fixes for Initial UE Context Setup
* !3953 Improvements in compilation dependence
* change dl_absoluteFrequencyPointA in targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.24PRB.usrpb210.conf to 640032
* !3900 [CI] Pull Ubuntu base image from internal registry
* !3910 GPU Channel Simulation: nr_dlsim/nr_ulsim Integration + CI Test
* !3942 CI: rework log analysis to simplify and allow new use cases
* !3870 Configure CSI-RS according to beam_id used by UE
Closes#897 and #834
See merge request oai/openairinterface5g!3950
[CI] Pull Ubuntu base image from internal registry
This MR updates the Docker build process for OAI images to use a private
registry for the Ubuntu base image ubuntu:noble. This will reduce the
possibility for CI disruption if no internet connection exists.
- Replace FROM ubuntu:noble with FROM <DEFAULT_REGISTRY>/ubuntu:noble in Ubuntu Dockerfiles
This change overcomes the pull rate limit issues from DockerHub in the
CI.
The <DEFAULT_REGISTRY> contains a multi-architecture image (arm64 and
amd64)
$ docker buildx imagetools inspect gracehopper3-oai.sboai.cs.eurecom.fr/ubuntu:noble | grep Platform
Platform: linux/amd64
Platform: linux/arm64
- The scripts run from the jenkins server everyday using a crontab.
- It pulls the AMD and ARM ubuntu:noble image on respective servers and
checks if the internal registry is in sync.
- If not, it pushes the ubuntu:noble image to the registry to remain in
sync with dockerhub.
It was initially foreseen to just check the program exit code, but most
executables don't return with 0 (so the CI would always fail). Add a
separate check that will check for the Bye., only going through the last
X lines instead of the entire file.
- we agreed to basically throw away the old log checker (as it is
unmaintainable)
- now: provide list of analysis to do
* all checkers in cls_log_analysis, can be unit tested (see also next
commit)
* looked up dynamically to simplify adding of new tests + config
* configured with
<analysis>
<services>DESCRIPTION [DESCRIPTION...]</services>
<service>DESCRIPTION</service>
...
</analysis>
where DESCRIPTION follows service=func[=options]:
- service is name of service to check
- func is function to call, which receives filename
- option are arbitary options to pass to func
<services> is whitespace delimited (so can take multiple service
analysis definitions)
<service> exists to allow service definitions with whitespace
changes that would not work in <services>
- I initially planned to check return code, but most softmodems actually
exit with non-zero return code, so this is still TODO
- Default analyzer (checking for assertions, ...) is always run if a
service is listed
- checks for file size
- add unit tests
- it is spaghetti code: difficult to understand which code paths are
taken
- the only effect seems to be in the UE log analysis function: it might
make the log fail. However, we test that iperf is successful
(Iperf2_Unidir()), and would detect before the log analysis if MBMS
traffic does not work
- the rest is only messages that likely nobody reads
The real reason for this change is to reduce the number of class members
in the ran.py class, to simplify the functioning of the eNB analysis
function (no self) to reduce dependencies on the ran.py class.
set -e makes the script exit on error. However, there is code to handle
a non-zero return code of the script, and -e prevents from writing the
footer.
add set -x to see all the commands that are being executed.
Use a raw string as suggested:
ci-scripts/cls_static_code_analysis.py:93: SyntaxWarning: invalid escape sequence '\:'
result = re.search('([a-zA-Z0-9\:\-\.\/])+\.git', self.ranRepository)
ci-scripts/cls_static_code_analysis.py:125: SyntaxWarning: invalid escape sequence '\.'
ret = re.search('cppcheck version="(?P<version>[0-9\.]+)"', str(line))
ci-scripts/cls_oai_html.py:221: SyntaxWarning: invalid escape sequence '\/'
cmd = "sed -i -e 's/__STATE_" + self.htmlTabNames[0] + "__/<span class=\"glyphicon glyphicon-remove\"><\/span>/' test_results.html"
ci-scripts/ran.py:428: SyntaxWarning: "\[" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\["? A raw string is also an option.
result = re.search('\[gNB [0-9]+\]\[RAPROC\] PUSCH with TC_RNTI 0x[0-9a-fA-F]+ received correctly, adding UE MAC Context RNTI 0x[0-9a-fA-F]+', str(line))
ci-scripts/ran.py:457: SyntaxWarning: "\[" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\["? A raw string is also an option.
result = re.search('\[PHY\]\s+problem receiving samples', str(line))
ci-scripts/ran.py:461: SyntaxWarning: "\[" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\["? A raw string is also an option.
result = re.search('\[MAC\]\s+Removing UE', str(line))
I am not sure we ever need the millisecond output. The date is typically
also clear from the output (we could print the date at the beginning,
once, instead, but this is not done here. Finally, in Jenkins, we
typically get time stamps. Thus, it's not necessary to print this by
default.
On the other hand, since it might be useful when running locally, make
time stamps in logs configurable.
Fixes for Initial UE Context Setup
This MR fixes DRB aggregation from E1 so DRBs from multiple PDU sessions
are appended correctly into the F1 DRB array instead of overwriting
existing entries. It also makes NGAP Initial Context Setup skip PDU
sessions that are already established for the UE, only setting up new
sessions.
DRB aggregation from E1: Adjust fill_drb_to_be_setup_from_e1_resp to
pass &drbs[nb_drb] into fill_f1_drbs_from_e1, ensuring DRBs from later
PDU sessions are appended after the current count.
Duplicate PDU sessions in NGAP Initial Context Setup: In
rrc_gNB_process_NGAP_INITIAL_CONTEXT_SETUP_REQ, detect requested PDU
session IDs that already exist with PDU_SESSION_STATUS_ESTABLISHED, log
a warning, and skip them so they are not added to UE->initial_pdus.
Synchronize multiple gNBs by aligning the slot boundaries
Currently, we derive frame and slot number based on proc->timestamp_rx
using
proc->frame_rx = (proc->timestamp_rx / (fp->samples_per_subframe*10))&1023;
proc->tti_rx = get_slot_from_timestamp(proc->timestamp_rx, fp);
This ignores the samples
proc->timestamp_rx % fp->samples_per_frame
while computing the frame and slot number creating a mis-alignment with
the slot boundaries. A detailed description of the slot misalignment
in a pictorial representation can be seen in an attachment in the MR [1].
We fix this alignment issue by compensating these samples during the
first reception.
We can test the synchronization of the multiple gNBs from the estimated
ToAs from the PRS in the Downlink and the estimated ToAs from the SRS in
the Uplink using rfsim.
In order to test this, make sure you build gNB and nrUE along with the
telnetsrv flag using the option --build-lib telnetsrv.
Also, enable the following log in the function
nr_est_srs_timing_advance_offset() in
openair1/PHY/NR_ESTIMATION/nr_measurements_gNB.c to observe SRS ToAs
LOG_I(NR_PHY, "SRS estimatd ToA %d [RX ant %d]: TA offset %d, TA offset ns %d (max_val %ld, mean_val %ld, max_idx %d)\n", srs_toa, ant, *ta_offset, *ta_offset_nsec, max_val, mean_val, max_idx);
Furthermore, update the option Active_gNBs = 2; in
targets/PROJECTS/GENERIC-NR-5GC/CONF/ue.nr.prs.fr1.106prb.conf to enable
decoding PRS transmitted from two gNBs
To run:
nrUE:
sudo ./nr-uesoftmodem -r 106 --numerology 1 --band 78 -C 3619200000 --uicc0.imsi 001010000000001 --rfsim --phy-test -O ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/ue.nr.prs.fr1.106prb.conf --rfsimulator.serveraddr server
gNB 0:
sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb0.prs.band78.fr1.106PRB.usrpx310.conf --gNBs.[0].min_rxtxtime 6 --rfsim --phy-test --rfsimulator.[0].serveraddr 127.0.0.1 --rfsimulator.[0].options chanmod --rfsimulator.[0].modelname AWGN --telnetsrv
gNB 1:
sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb1.prs.band78.fr1.106PRB.usrpx310.conf --gNBs.[0].min_rxtxtime 6 --rfsim --phy-test --rfsimulator.[0].serveraddr 127.0.0.1 --rfsimulator.[0].options chanmod --rfsimulator.[0].modelname AWGN --telnetsrv
When we run the nrUE, gNB0 and gNB1, we can see the following logs
nrUE:
[PHY] [gNB 0][rsc 0][Rx 0][sfn 976][slot 2] DL PRS ToA ==> 0.0 / 2048 samples, peak channel power -16.4 dBm, SNR +4.0 dB, rsrp -42.2 dBm
[PHY] [gNB 1][rsc 0][Rx 0][sfn 976][slot 3] DL PRS ToA ==> 0.0 / 2048 samples, peak channel power -16.4 dBm, SNR +4.0 dB, rsrp -42.2 dBm
gNB 0:
[NR_PHY] SRS estimatd ToA 0 [RX ant 0]: TA offset 31, TA offset ns 0 (max_val 99820162, mean_val 80176, max_idx 0)
gNB 1:
[NR_PHY] SRS estimatd ToA 0 [RX ant 0]: TA offset 31, TA offset ns 0 (max_val 98784562, mean_val 79369, max_idx 0)
From the above logs, when we run the rfsim and when no delays introduced, we can observe the following results
In the Downlink at the UE, the estimated ToAs using PRS from both gNB0
and gNB1 are 0 and in the uplink, the ToA estimated from the SRS
transmitted by the UE at both the gNBs are also 0. This indicates that
both the gNBs are synchronized along with their slot boundaries. We also
highlight that this is not the case in the current develop branch since
the slot boundaries are not aligned.
We also can test the multi gNB synchronization by introducing delays
using telnet as follows,
Introduce new_offset (delay) of 4 samples to the gNB 0 from UE in the
uplink as follows,
openairinterface5g$ echo rfsimu setdistance rfsimu_channel_enB0 20 | ncat --idle 1 127.0.0.80 9080
softmodem_gnb> rfsimu_setdistance_cmd: new_offset 4, new (exact) distance 19.518 m, new delay 0.000065 ms
Ncat: Idle timeout expired (1000 ms).
We can oberve this delay of 4 samples being reflected in the estimated
SRS ToAs at gNB 0 while not changing the ToA in gNB 1
[NR_PHY] SRS estimatd ToA 4 [RX ant 0]: TA offset 31, TA offset ns 65 (max_val 98803636, mean_val 79430, max_idx 8)
similarly, Introduce new_offset (delay) of 2 samples to the gNB 1 from
UE in the uplink as follows,
openairinterface5g$ echo rfsimu setdistance rfsimu_channel_enB0 10 | ncat --idle 1 127.0.0.81 9081
softmodem_gnb> rfsimu_setdistance_cmd: new_offset 2, new (exact) distance 9.759 m, new delay 0.000033 ms
Ncat: Idle timeout expired (1000 ms).
We can oberve this delay of 2 samples being reflected in the estimated
SRS ToAs at gNB 1 while not changing the ToA in gNB 0
[NR_PHY] SRS estimatd ToA 2 [RX ant 0]: TA offset 31, TA offset ns 32 (max_val 98962768, mean_val 79552, max_idx 4)
Closes#897
[1] https://gitlab.eurecom.fr/oai/openairinterface5g/-/merge_requests/3892
Remove L1 dependence from NR band number
L1 band information relied on get_band function that couldn't provide an
unambiguous result. Also there is no SCF compliant parameter for L1 and
generally we don't really need that information in L1.
The MR also remove a RU section that used nr_band but was never really
accessed in NR.
Add missing packing for CONFIG.request parameter BetaPSS
Adds the packing procedure for the parameter BetaPSS, as well as adding this
parameter to the utility functions where it is missing
IPV6 support for telnet socket binding
Now, the listening telnet socket is only bound to the dedicated interface IPs in
config file, both for V4 and V6
Closes#834
Fix error
openair1/SIMULATION/NR_PHY/dlsim.c:1057:37: runtime error: member access within misaligned address 0x7f8a67e01010 for type 'struct NR_Sched_Rsp_t', which requires 32 byte alignment
Prior to this commit, constants NB_ANTENNAS_RX/TX are provided on the
command line to each compiler invocation. This has the drawback (1) that
also files that don't need that get the constants, and (2) it is not
easy to find them using ctags or similar, as the only definition is in
CMakeLists.txt (where it is not found).
In this commit, use cmake configure_file() to write a header file with
these constants. The file will be generated during cmake invocation, and
written to <build-dir>/common/cmake_defs.h. The relevant files that
need this definition will pick it from the header.
This has been used previously also in a commit to write git information.
See-also: 8bffd1666d ("Avoid complete rebuild on cmake run with git info change")
Since the grand-parent commit, if possible, the gNBs synchronize on a
slot-level boundary. Some configuration files/command line overrides
left the same SSB position for two DUs in RFsim-based handover
scenarios, which then makes that the UE cannot decode the SSB.
This commit changes the positions such that this is possible again. In
the F1 HO docker-compose
(ci-scripts/yaml_files/5g_f1_rfsimulator/docker-compose.yaml), we set it
to 2 to send only one SSB (not 2 with bitmap 3).
The code previously checked that the supplied PDU sessions's type is
exactly what we requested. However, at least OAI 5GC will only give us
an IPv4 PDU session if we request IPv4v6 (so the check would fail).
Extend the validation to either check exact match, or, if IPv4v6
requested, that it is either IPv4 or IPv6.
Similarly to gNB, eNB, lteUE, end with a "Bye." that the CI (will) check
for.
The right way to do this would be to use the exit code, but most
executables do not actually end with 0, such that we need to check for
this. Thus, this commit is only to harmonize with other executables.
Integration: `2026.w08`
* !3934 Fix Ubuntu build: reinstate -Werror
* !3803 remove cblas and atlas dependancy
* !3918 Add a simple GTP unit test
* !3924 T: macpdu2wireshark: gentle exit (and some other minor work in the T tracer)
* !3925 Fix race condition on double RA during RRC reestablishment
* !3930 bugfix: add PCell to serving_cells in fallback path and refactor update logic
* !3936 [FHI72] Remove support for xran E release
* !3893 NR Paging on CU
See merge request oai/openairinterface5g!3939
In the case that the config module cannot load the driver for libconfig
or yaml, currently, there might be a cascade of errors that are
difficult for users to understand. For instance (partially redacted for
clarity):
[CONFIG] Error calling dlopen(libparams_libconfig.so): libparams_libconfig.so: cannot open shared object file: No such file or directory
[CONFIG] config module "libconfig" couldn't be loaded
[CONFIG] config_get, section log_config skipped, config module not properly initialized
[LOG] init aborted, configuration couldn't be performed
[CONFIG] config_get, section (null) skipped, config module not properly initialized
[CONFIG] /home/francesco/openairinterface5g/common/config/config_userapi.c 68 nfapi has no processed integer availablle
[CONFIG] config_get, section (null) skipped, config module not properly initialized
Assertion (get_softmodem_params()->default_pdu_session_id == -1) failed!
In get_common_options() /home/francesco/openairinterface5g/executables/softmodem-common.c:161
Use uicc0.pdu_sessions.[0].id to change the requested PDU session ID (is 0)
Here, the error is the missing shared object, but a user is more likely
to look at the last error instead of the first.
This commit addresses it by checking early for
CONFIG_ISFLAGSET(CONFIG_ABORT), and stopping if it is set. Additionally
changes include making functions static, removing late
CONFIG_ISFLAGSET() checks, and the CONFIG_ISFLAGSET() in
load_configmodule(), because at that time "uniqCfg" is not set yet and
thus does not do anything (this is likely a regression of an earlier
cleanup).
See-also: f50d5f5a9b ("make multiple config instead of one implicit
global")
NR Paging on CU
Implements the NR paging path on the CU:
- NGAP Paging is decoded and passed to RRC
- RRC builds F1AP Paging, and distributes it to DUs via F1 callback
Changes:
- Refactor and extend F1AP Paging encode/decode libraries
* add missing enc/dec/eq/cp functions
* add unit test
* IEs: CN UE 5G-S-TMSI, RAN UE I-RNTI; optional DRX/priority/origin)
- Refactor CU callback CU_send_Paging
- Refactor DU handler DU_handle_Paging
- Refactor old F1 callback for Paging indication, extend it and align
with existing F1 callbacks in stack
- Refactor and extend NGAP Paging encode/decode lib
* add missing enc/dec/eq/cp functions
* add unit test
* Fixes NGAP paging to accept Paging only on SCTP stream 0 per TS
38.412
- Includes supporting refactors (PDU session split, shared 5G-S-TMSI
helpers, NGAP/F1AP cleanups)
Testing
- NGAP and F1AP Paging lib unit tests (enc/dec)
- Stream-0 fix validated with Open5GS AMF
This MR does not address the DU changes besides the F1 handler. F1AP
Paging does not have an RRC container to pass the PCCH message to the
DU, and F1 DL RRC Message Transfer does not apply to PCCH. PCCH-Message
shall be built at DU per TS 38.331 §5.3.2, with padding as per §8.5 and
delivered as RLC SDU per §8.2. For each cell in Paging Cell List that
belongs to this DU, queue for MAC. MAC schedules at PF/PO per TS 38.304
§7.
Refs:
- F1AP 3GPP TS 38.473 version 16.21.0 Release 16
- NGAP 3GPP TS 38.413 version 16.17.0 Release 16
bugfix: add PCell to serving_cells in fallback path and refactor update logic
Fix assertion failure in rrc_gNB_send_NGAP_NAS_FIRST_REQ() when RRC
Reestablishment falls back to RRC Setup. The fallback path was not
adding the PCell to the UE's serving_cells array, causing
rrc_get_pcell_for_ue() to return NULL.
Major changes:
- Add rrc_update_ue_pcell() helper function that handles PCell updates
for both new UEs (fallback) and existing UEs (normal reestablishment)
- Refactor normal reestablishment path to use rrc_update_ue_pcell()
helper instead of manual cleanup + add sequence
- Add PCell update to fallback_rrc_setup path using the same helper
- Move C-RNTI validation after current_cell fetch to ensure current_cell
is initialized before fallback_rrc_setup label
- Change error handling: return instead of fallback when PCell add fails
in normal reestablishment path
Fixes CI failure in !3908
Fix race condition on double RA during RRC reestablishment
Sometimes, especially in poor channel conditions, a UE can trigger
multiple RA procedures during RRC reestablishment, causing
reconfigCellGroup to be overwritten with a CellGroup that already has
spCellConfig removed, leading to an assertion failure in
update_cellgroup_for_reestablishment(). See logs below
[NR_MAC] 456.13 UE 991d: Received Ack of Msg4. CBRA procedure succeeded (UE Connected)
[NR_MAC] Adding new UE context with RNTI 0x991d
[NR_PHY] [RAPROC] 461.9 Initiating RA procedure with preamble 8, energy 48.0 dB (I0 274, thres 130), delay 21 start symbol 2 freq index 0
[NR_MAC] 461.9 UE RA-RNTI 0081 TC-RNTI ecd8: initiating RA procedure
[NR_MAC] UE ecd8: Sync beam index 0
[NR_MAC] UE ecd8: Msg3 scheduled at 462.3 (461.18 TDA 2) start 0 RBs 8
[NR_MAC] UE ecd8: 461.18 Generating RA-Msg2 DCI, RA RNTI 0x81, state 1, preamble_index(RAPID) 8, timing_offset = 21 (estimated distance 820.3 [m])
[NR_MAC] 462. 3 PUSCH with TC_RNTI 0xecd8 received correctly
[NR_MAC] Received a MAC CE for C-RNTI with 991d
[NR_MAC] Remove NR rnti 0xecd8
[NR_MAC] 462. 3 RA with C-RNTI 991d complete
[NR_PHY] [RAPROC] 471.19 Initiating RA procedure with preamble 6, energy 51.0 dB (I0 276, thres 130), delay 21 start symbol 2 freq index 0
[NR_MAC] 471.19 UE RA-RNTI 010d TC-RNTI 022d: initiating RA procedure
[NR_MAC] UE 022d: Sync beam index 0
[NR_MAC] UE 022d: Msg3 scheduled at 472.13 (472.8 TDA 2) start 0 RBs 8
[NR_MAC] UE 022d: 472.8 Generating RA-Msg2 DCI, RA RNTI 0x10d, state 1, preamble_index(RAPID) 6, timing_offset = 21 (estimated distance 820.3 [m])
[NR_MAC] 472.13 PUSCH with TC_RNTI 0x022d received correctly
[NR_MAC] Received a MAC CE for C-RNTI with 991d
[NR_MAC] Remove NR rnti 0x022d
[NR_MAC] 472.13 RA with C-RNTI 991d complete
[NR_RRC] [UL] (cellID 1, UE ID 1 RNTI 991d) Received RRCReestablishmentComplete
[NR_RRC] UE 1 Processing NR_RRCReestablishmentComplete from UE
[NR_MAC] UE 991d: gNB-DU Configuration Query received, will include CellGroupConfig in response
Assertion (new_CellGroup->spCellConfig) failed!
In update_cellgroup_for_reestablishment() /phy/openairinterface5g/openair2/LAYER2/NR_MAC_gNB/mac_rrc_dl_handler.c:666
This MR solves it by skipping the reconfigCellGroup overwrite when it
already holds a valid config with spCellConfig, and by replacing the
fatal assertion on missing spCellConfig with an early return.
T: macpdu2wireshark: gentle exit (and some other minor work in the T tracer)
When outputting to a file, typing ctrl+c exits the program without
calling fclose(), leading to loss of traces in the output file.
Let's intercept ctrl+c and exit gently, calling fclose().
Also include a small fix for compilation of _check_vcd, some work on
extract and hacks/plot-ofdm, minor stuff.
Add a simple GTP unit test
Add a simple unit test for GTP that as of now tests the main
functionality, i.e., for a single UE, set up a bearer between two
endpoints and checking that traffic sending works. This is a start to
extend it further, e.g., with API changes, extensions to support new
functionality such as IPv6, and refactorings.
A number of supporting cleanup has been done as well.
remove cblas and atlas dependancy
With new Fedora, we have again the cblas.h place not working
cblas+atlas dependancy is annoying for years
i start this MR to remove this dependancy
first commit: only cleaning: remove dead code, make static functions,
simplify code
after this commit, we see we use blas only in: conjugate_transpose()
that is a quite trivial function H_hermH_plus_sigma2I() a bit more
complex, but still possible to recode mutl_matrix_matrix_col_based() i
think we have the same elsewhere in OAI
atlas is used only in: lin_eq_solver() in don't know if replacement is
hard
We can observe all is related to MMSE, that is also coded in OAI 5G, so
maybe the solution is to use 5G code in 4G
Since nothing seems to be used, we can remove it.
For unit testing, allow to remove endpoints such that we could reuse a
port/IP combination.
The function does not take care of endpoints that are still "dangling",
it is the user's responsibility to remove all existing TEIDs.
Add a simple unit test that tests sending unidirectional traffic. So
far, it merely replicates what is already in nr-cuup-load-test, but it's
a single executable (so easier to handle), and could be more easily
extended to further tests (e.g., IPv6).
A couple of ideas for refactoring/improvements have been added in
comments in the test.
Since the parent commit, USE_MMSE is not defined. Thus, the
corresponding code is commented out. Since there are no linker problems,
it is obvious that this code is never called, and we can remove it.
This reverts commit 16c333b1a3.
I tried to build everything in Ubuntu images, but
- this introduced a regression (ignores $BUILD_OPTION)
- made that we don't use -Werror (when we should)
I tried to fix the use of the first, but it would involve more changes
than I prefer. On the second, we cannot enable -Werror, as FlexRIC does
not build warning-free (in Release mode). We thus have to build only the
targets that we require, and therefore we can keep using build_oai,
which is the simplest option (cf. the first point).
fix(ci): remove git reset command from Jenkinsfile
- By default, the variable eNB_CommitID is set as 'develop' in the
config
- When OAI-FLEXRIC-RAN-Integration-Test is triggered by upstream FlexRIC
push events, it takes develop
- Triggered by RAN takes commit SHA where origin/SHA does not work
Below are issues seen after this week's merge to develop:
https://jenkins-oai.eurecom.fr/view/RAN/job/RAN-Ubuntu-ARM-Image-Builder/4103/pipeline-overview/?selected-node=44
08:43:07 + git reset --hard origin/9777d23173a740de7cf982659fae13ad6627d3aa
08:43:07 fatal: ambiguous argument 'origin/9777d23173a740de7cf982659fae13ad6627d3aa': unknown revision or path not in the working tree.
When triggered through upstream FlexRIC (as a PUSH Event), it is taking
the branch as shown in the logs:
https://jenkins-oai.eurecom.fr/job/OAI-FLEXRIC-RAN-Integration-Test/3832/pipeline-overview/?selected-node=47
13:45:27 + git reset --hard origin/develop
13:45:27 HEAD is now at 9777d23173 Merge branch 'integration_2026_w06' into 'develop'
Cleanup Cmake: remove some double compilation
Harmonize some cmake code to avoid double compilation, notably around
polar and smallblock. In develop, we just add their sources to other
targets, whereas now we define STATIC libraries (further changed to
shared library in !3856) to avoid double compilation.
With this command line:
cmake .. -GNinja -DENABLE_TESTS=ON && ninja
shows that before we compile 12631 files, where after it is 12583
there is additional supporting cleanup (move code, remove headers,
types, ...).
there is more harmonization to do, I limited myself to some easy wins.
For instance, we do the same with PDCP/SDAP, and this should be
refactored into STATIC libraries as well.
Fix SRS power computation
The SRS symbols have been remapped recently in
srs_estimated_channel_freq, and therefore the calculation of the SRS
power has to retrieve the symbols from different positions.
CI: Rename RAN-SA-2x2-Module-CN5G pipeline
RAN-SA-2x2-Module-CN5G performs tests not only with 2x2 but also with a
4x4 MIMO configuration. The pipeline name has been generalized to
RAN-SA-Multi-Antenna-CN5G to cover multiple antenna configurations.
RRC: Multi-cell handling architecture
This MR implements a foundational multi-cell handling architecture for
RRC by separating DU management from cell management and establishing a
hierarchical cell organization within each DU container. The changes
enable proper multi-cell support where each DU can serve multiple cells,
addressing the previous limitation where DU and cell management were
tightly coupled with the assumption of one cell per DU.
Key Changes:
- Data Structure Separation: Separated for DU containers (DU-specific
info) from cell containers (cell-specific data)
- Global DU and Cell Trees: Cells are now stored in global RB trees in
RRC, similarly to DUs
- Du-specific cell seq_arr: within each DU container (du->cells) is
stored a seq_arr of cells belonging to the DU
- UE Cell Association Framework: Introduced serving_cells array to track
PCell and SCells for each UE with servCellIndex indexing
- Cell Management Library: Extracted cell management functions into
rrc_cell_management.c/h for better testability and maintainability
Other relevant changes:
- F1AP Refactoring: cell list definitions, heap allocation to prevent
stack overflow
- 5G-S-TMSI Helpers: Common helper functions for 3GPP TS 23.003
compliant construction
- Integration Tests: Comprehensive test suite for DU lookup, cell
lookup, and UE cell association
- Cell Duplication Checks: Validation in F1 DU configuration update to
prevent duplicate cells
- Documentation: Updated RRC developer documentation with multi-cell
architecture details
Validated with RFsim in re-establishment and handover scenarios.
openair2/COMMON/rrc_messages_types.h has mostly 4G types. The only 5G
(gNB) RRC type is gNB_RrcConfigurationReq, which we can move to a header
in the corresponding directory (where it is used).
This allows to separate 5G gNB RRC module from the 4G types in
rrc_messages_types.h in the next commit.
Robert Schmidt