Integration: `2025.w03`
See merge request oai/openairinterface5g!3206
* !3167 remove calls to clear SIMD registers, that was a historical issue
* !3179 UE statistics improvements
* !3193 Remove spinlock from threadpool task return
* !3195 UE MAC: in phy-test/do-ra, fill TB randomly
* !3201 T tracer: minor fixes for compilation
* !3204 CI: Increase number of test trials for timing tests
* !3034 Delay compensation for PUCCH2
* !3205 Fix calculation of RSSI in pucch_rx.c
Fix calculation of RSSI in pucch_rx.c
Fix two issues with RSSI calculation in PUCCH:
- RSSI was calculated using partial sum instead of average of squared samples.
- There was a missing parentheses pair which causes the RSSI value to underflow.
The proper way to calculate power in dBFS is
let signal_energy = average of squared samples of received signal over resource elements, antennas and symbols under measurement
then:
rssi[dBFS] = -10log10(max_sample^2 / signal_energy),
or (to avoid division):
rssi[dBFS] = -(10log10(max_sample^2) - 10log10(signal_energy))
CI: Increase number of test trials for timing tests
- Increasing a number of test trials aims to reduce variations and
improve reliability of the nr_ulsim and nr_dlsim test results.
- Disable CPU sleep states on the machine when running physims.
- Minor adjustment of timing threshold in 60 MHz phytest.
Delay compensation for PUCCH2
- Implementation of delay compensation for PUCCH2, which minimizes for
exampe logs "reported RSRP index XXX invalid"
- Adding a test to the CI to perform the delay compensation in PUCCH2
- Refactor code to use c16_t data type in PUCCH decoder
Remove spinlock from threadpool task return
The idea to use atomic aligned to cache line for counting finished jobs
is reused, but instead of polling a semaphore was added.
remove calls to clear SIMD registers, that was a historical issue
This works because gcc/clang replaces the MMX calls by SSE2 automatically.
There are some mm_empty() calls in bad places (places where we don't use
_m64) and it is lacking in places where we still use _m64. Given that
MMX calls are converted to SSE2, there is no problem, and we will remove
remaining _m64 variables.
Fix two issues with RSSI calculation in PUCCH:
- RSSI was calculated using partial sum instead of average of squared samples.
- There was a missing parentheses pair which causes the RSSI value to underflow.
The proper way to calculate power in dBFS is
let signal_energy = average of squared samples of received signal over resource
elements, antennas and symbols under measurement
then:
rssi[dBFS] = -10log10(max_sample^2 / signal_energy),
or (to avoid division):
rssi[dBFS] = -(10log10(max_sample^2) - 10log10(signal_energy))
Integration: `2025.w02`
Closes#866 and #887
See merge request oai/openairinterface5g!3197
* !3135 replace a set of #define by a C bit array, remove duplicated extern global variable declaration
* !3173 nrLDPC_coding: improvements
* !3181 Use UL actor for processSlotTx
* !3186 chore(ci): improved errors messages visibility
* !3101 NR gNB improvements for analog beam management
* !3130 NR gNB MSG3 TPC
* !3175 Improvements for PUSCH per symbol processing
* !3177 CI: change frequency for timing and B200-SABOX pipelines
* !3188 NR UE fix DCI mask size
* !3119 Config files improvements for PRACH
* !3196 Fix yaml example config file
* !3187 nrLDPC_coding: Fix naming, comments, superfluous variables and documentation typos in coding library interfaces
* !3076 move UL_INFO structure allocation local to a rx slot processing
* !3189 fhi_72: allow to provide dpdk_iova_mode to xran
* !3182 RSSI threshold for PUSCH & PUCCH power control
* !3103 Introduce ITTI queue in RRC-to-MAC direction
RSSI threshold for PUSCH & PUCCH power control
To prevent ADC railing or "clipping" when the received power is too
large, introduce RSSI threshold parameters for PUSCH and PUCCH, which
are now configured in units of 0.1 dB. Here is how you can configure and
use these thresholds:
1. Configuration:
- Set the pusch_RSSI_Threshold and pucch_RSSI_Threshold parameters in
your configuration file (e.g., gnb.conf) (MACRLC section).
- These parameters define the maximum acceptable RSSI values for
PUSCH and PUCCH, respectively. The unit is either dBm or dBFS,
depending on the RSSI reporting configuration.
2. Usage:
- The nr_limit_tpc function will automatically adjust the Transmit
Power Control (TPC) commands based on the configured RSSI
thresholds.
- If the RSSI exceeds the threshold, the TPC command will be limited
to prevent further increase in power, thereby avoiding ADC
clipping.
Introduce ITTI queue in RRC-to-MAC direction
resolve ue rcc to mac race conditions by a itti queue, but it doesn't
resolve the problem of exact slot we should apply the new cell
configurtion
fhi_72: allow to provide dpdk_iova_mode to xran
- Introduce a gNB configuration option that enables users to select the
desired IOVA mode for DPDK ("PA" or "VA") with dpdk_iova_mode
parameters in fhi_72 configuration section. If not set, the default
remains PA mode to ensure backward compatibility with existing
configurations. Detailed information about IOVA modes, including their
advantages and disadvantages, can be found in the DPDK documentation:
Memory in DPDK Part 2: Deep Dive into IOVA
- Using IOVA VA mode allows DPDK to run without requiring SYS_ADMIN
capability for the docker container.
- Switch to IOVA VA mode in the FHI7.2 pipeline and reduce the required
capabilities for the docker container.
Move UL_INFO structure allocation local to a rx slot processing
UL_INFO is allocated a gNB, so require mutex and obscur information
passing function to function. Instead, make a local UL_INFO per slot,
removing the mutex and making the code easier to understand.
Use UL_INFO on the stack, to simplify the code. move in the same struct
the associated rach, pdu, crc, srs arrays that where pointed from
directly in gNB structure Keep in nfapi the existing logic that make
malloc for theses rach, pdu, crc, srs array lists
Pass only relevant fields, where appropriate.
Co-authored-by: Robert Schmidt <robert.schmidt@openairinterface.org>
nrLDPC_coding: Fix naming, comments, superfluous variables and documentation typos in coding library interfaces
This MR is clarifying the interfaces to the LDPC coding libraries. It
aims to improve the readability of the interfaces and compliance of
naming with specification 38.212.
Fix yaml example config file
amf_ip_address is decoded as a paramlist_def_t and not as a paramdef_t,
so in the config file it should be a list of ip addresses
In current develop just by trying to run this config file with:
sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.yaml
results in a segfault.
Config files improvements for PRACH
Some PRACH parameters in configuration files are not properly set.
- number of SSB per RACH occasion should be 1 when we have only 1 SSB
(it would still work with 1/2 but it makes little sense and might
limit UE selection of ROs).
- some PRACH configuration indices would generate PRACH conflicting with
PUCCH and therefore reducing scheduling capabilities
Further cleanup of some config files still using deprecated fields
Switching to IOVA VA mode in the FHI7.2 pipeline reduces the required
capabilities for the Docker container. This change allows the removal
of the SYS_ADMIN capability.
In DPDK, IO Virtual Addresses (IOVA) refers to the memory addressing
scheme used for IO operations. The two IOVA modes supported by DPDK are:
- IOVA as Physical Address (PA): IO memory addresses correspond directly
to physical addresses, no address translation required.
- IOVA as Virtual Address (VA): IO memory addresses align with user-space
virtual addresses, requiring IOMMU to remap physical memory.
Previously, this was hardcoded to 0, to use IOVA as PA mode, with xRAN's
DPDK EAL initialization using the "--iova-mode=pa" flag.
This commit introduces a gNB configuration option to allow users to select
the desired IOVA mode. The default remains PA mode to
ensure backward compatibility.
Using IOVA VA mode allows DPDK to run without requiring SYS_ADMIN
capability in the docker container.
NR UE fix DCI mask size
Previous maximum size was 15 but in practice it could be at least up to
18. Also moved assertion on non-contiguous type0 DLSCH allocation to L1
(to remove blocking point for L2 implementation).
CI: change frequency for timing and B200-SABOX pipelines
Change center frequency of
- RAN-SA-B200-Module-SABOX-Container - 20 MHz TDD SA scenario from
3309.48 MHz to 3609.12 MHz
- RAN-gNB-N300-Timing-Phytest-LDPC - Timing phytest 40 MHz scenario from
3619.08 MHz to 3319.68 Mhz
to avoid interference between the SABOX and timing pipeline.
Improvements for PUSCH per symbol processing
- Improved the assert in task_ans.c
- Fixed and issue with PUSCH per-symbol processing that could cause an
issue in case num_pusch_symbols_per_thread is not 1.
NR gNB MSG3 TPC
This MR improves the handling of MSG3 TPC commands at MAC gNB.
TODO: Compute TPC when PRACH sends a valid power measurements (currently
not the case for OAI L1, to be verified with Aerial L1)
Closes#866
NR gNB improvements for analog beam management
- Improvements at gNB MAC layer to properly handle analog beam
management for all channels
- Simple beam switching mechanism based on UE RSRP report
