1: there can be 2bits AckNack + SR in PUCCH F0
2: when allocating csi_pucch, zero out struct
3: Make unfree resources a warning
4: When asserting, explain the issue
- Configure PUCCH Format 0 to be in separate RBs (each UE has dedicated
resources)
- Configure RA preamble to be different per UE
- Configure CSI offset such that no two UEs have their report in the
same frame
Nb_ue is not unique among UEs: consider 2 UEs present. The last UE has
CSI idx "2". Now the first UE disconnects, and a new UE connects. It
will also get CSI idx "2", and I assume this is not what we want.
MR !1079 / MR !1108:
1. Read slots from config file and schedules all slots *except* for slots 0 and 10. This is not a problem, since currently we cannot allocate more than six HARQ feedbacks in a slot, but we might have up to 7 with current configuration
2. phytest mode is configurable. From `nr-softmodem -h`:
-m: Set the downlink MCS for PHYTEST mode
-t: Set the uplink MCS for PHYTEST mode
-M: Set the downlink banwdwidth (in PRBs) for PHYTEST mode
-T: Set the uplink banwdwidth (in PRBs) for PHYTEST mode
-D: Bitmap for DLSCH slots (slot 0 starts at LSB)
-U: Bitmap for ULSCH slots (slot 0 starts at LSB)
3. Scheduler prints more information: UE PHR, PUCCH SNR, PUSCH SNR, RSSI
4. The scheduler learned to scheduler DLSCH/ULSCH in mixed slots (if the time domain allocation matches the mixed slot)
5. The scheduler expects
* PDSCH Time Domain allocation index 0 to be the DL slot allocation
* PDSCH TDA index 1 for Mixed DL slot
* PUSCH TDA index 0 for UL slot
* PUSCH TDA index 1 for Mixed UL slot
* PUSCH TDA index 2 for Msg.3
6. Some more cleanup, e.g., separate PDSCH/PUSCH data structures into "semi-static" data (e.g., TDA allocation to use, since it changes seldomly) and "dynamic" data (e.g., RB allocation per slot, which changes every slot)
MR !1137 : Benetel config files fix
LocationandBandwidth adjusted according to the location of SSB and Controlresourceset 0
For example for 106RBs configuration files -
- AbsoluteFrequencySSB = 641032 = RB43 (1032/24) - points to Subcarrier 0 of RB10 of SSB block
- Hence SSB is located from RB33-RB53
- Coresetzero sent in MIB is 0 which means offset 0, RBsize 24 from Start of SSB according to table 13.4 in Spec 38.213
- InitialBWP should start from RB 33 (offset is 0 from SSB) and should be a size of minimum 24 RBs.
- SLIV = 275 * (24-1) + 33 = 6358
Controlresourceset value wrongly configured to 12 , changed to 0 as sent in MIB.
Procedure fill_dmrs_mask is modified.
- PDSCH Mapping Type B is supported
- Modified according to sections 5.1.6.2 of Spec 38.214
- Single and double symbol DMRS are handled in Type A and Type B
Mapping type according to the time domain allocation from DCI should be used to get the values of DMRS config
For sending sib1 - DCI FORMAT 1_0 will be used with SI_RNTI, UE should perform these actions
according to sections 5.1.6.2 of Spec 38.214
Additional DMRS set to pos2 in case of msg2 reception, msg3 transmission.
Mapping type B is added to RRC reconfig.
- nr_dlsim updated to test typeA and typeB. Verified the changes.
- RFSIM Validation of PDSCH Mapping TypeB by changing timedomainallocation in configuration files.
to Cluster-based testing
- In old VM pipeline, disabled phy-sim VM creation, build and testing
- In new Container pipeline, added new stage
Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>
Raymond Knopp