- Reworked nrLDPC_decoder_offload.c to process all segments in a TB with a single call to LDPCdecoder() or LDPCencoder().
- Perform CRC checks on the T2.
- Modified nr_ulsch_decoding (gNB decoder) to:
- Count processed segments.
- Properly perform CRC checks.
- Created a constant NR_LDPC_MAX_NUM_CB to define the maximum number of codeblocks.
- Conditional library loading:
- On gNB: Load ldpc_t2 library if offload is enabled using the --ldpc-offload-enable flag.
- On UE: Load both ldpc_t2 and ldpc libraries since only encoder offload is supported.
- General cleanup of nrLDPC_decoder_offload.c for improved readability and maintainability.
- Modified the structure of LDPC encoder/decoder/offload parameters:
- Introduced a structure for code block (CB) related parameters.
- Removed parameter E from the encoder and offload parameter structures for clarity.
- Replaced E with perCB->E_cb in the UE encoder code.
- Phy config update and Sidelink frame parameters initialisation
- PSBCH scheduler to trigger TX PSBCH/RX PSBCH actions
- Sidelink indication with rx ind to trigger send SL-MIB to MAC
- Enable Scope for PSBCH use -d or --dqt
- Enable system testing of PSBCH for example using RFSIMULATOR:
- UE1 is a SYNCRONISATION SOURCE UE which transmits PSBCH
started using command -
sudo ./nr-uesoftmodem --sl-mode 2 --sync-ref 4 --rfsim --rfsimulator.serveraddr server
- UE2 syncs onto UE1 during sidelink search, gets the timing and continues to receive PSBCH
started using command -
sudo ./nr-uesoftmodem --sl-mode 2 --rfsim --rfsimulator.serveraddr 127.0.0.1
- In the default use case 2 Sidelink SSBs sent over 16 frames.
- In case SL-SSB configuration needs to be changed use -O option in the above command like
-O ../../../targets/PROJECTS/NR-SIDELINK/CONF/sidelink_preconfig_1txpool.conf
The main thread of nr-uesoftmodem (executing main()) is mostly working;
it is thus not necessary to set high priority. Instead, the threads
created with threadCreate() will receive higher priority, if possible
(as determined by the availability of SYS_NICE capability).
To inform if SYS_NICE is not present, print a warning in main().
SYS_NICE is a capability that allows a process to set thread affinity
and priority, among other things (see capabilities(7) for more info).
In this commit, add a function that allows to determine if the process
has this capability, and try to change the thread affinity and priority,
if requested. If the capability does not exist, the function will simply
not attempt to change the corresponding thread attributes.
To determine if the process has SYS_NICE, libcap can be used. However,
it might not be installed by default. To avoid requiring another
dependency, if we detect that libcap is not present, use a workaround by
try to set a real-time scheduling policy; if it's present, or can be
changed, we assume that the process has SYS_NICE (and clean up, if
relevant).
Simplify reading of capabilities
set_latency_target() attempts to set keep "low latency" by
- writing a specific latency to /dev/cpu_dma_latency
- setting manually the minimum CPU processor frequency to be the maximum
There is no functionality to undo this after stopping the softmodem(s),
and most users are probably not even aware that OAI does this. It is
generally preferable to set this beforehand using a governor or by
disabling sleep states (as outlined in the tutorial, and in a follow-up
commit in the performance tuning docs).
The previous mlockall() call, to lock memory to RAM, is retained in a
new function. There were additional mlockall() calls, which have been
replaced with lock_memory_to_ram(), where necessary.
There is already a command line option called 'ue-scan-carrier' which
seemed to blindly look for SSB by changing the center frequency by
+/-100Hz if the previous attempt failed. This is probably copied from
LTE and is not suitable for NR. This commit uses this option to either
1. Perform initial sync on one GSCN if the SSB position if known
2. Or scan the all GSCN (if the SSB postion is unknown)
Also, the following is done for re-synchronization
1. Scan all GSCN when UE comes back from IDLE state
2. Scan one GSCN when UE does re-estabishment
Removed dependency of lte-softmodem.h in nr-softmodem.c.
CONFIG_HLP_UESCAN is declared also in lte-softmodem.h.
The absslot_tx overflow issue observed during integration testing of AW2S
RU with GPS as the source for the clock synchronization. Causes the gNB
not to start the TX thread and stops the processing.
Add an API to allow out-of-order writes to a radio interface, unlike the
current interface.
this function is called in UE in this commit, even if the tx might
still be in order.
Later, i plan to improve UE pulti-threading, that will lead to out of
order tx. also, the gNB will benefit of this new function to replace
several specific pieces of code that reorder tx with over complex and
slow systems
Robert Schmidt